Features
•
Smart Card Interface
– Compliance with Standards
• ISO/IEC 7816-1, 2, 3 and 4
• EMV 2000
• CB
• Mondex
®
, Proton, ZKA, Other: Contact Gemplus
®
– Supported Smart Cards
• Number of Smart Cards Supported: 1
• Asynchronous Cards: T=0 and T=1
• Synchronous/Memory Cards Using a Command Interpreter
• EMV or Non EMV Cards
Electrical Interface
• Transmission Speed: 9.6 Kbps to 115 Kbps
• Card Power Supply: 1.8V/3V/5V
• ESD Protection On Card Pins: 4 KV - Human Body Model
• Card Presence or Insertion Detection
• Short Circuit Current Limitation
Host Interface
– Physical Layer
• Serial Asynchronous Link
• Programmable Transmission Speed From 1,200 bps to 115,200 bps
• Format: 8 bits, No Parity, 1 Stop Bit
• Adjustable Signal Voltage
– Protocol
• Gemplus Block Protocol (GBP)
• GBP Interface Library Kit Source Code
Chip Power Supply
– Voltage: V
CC
- 2.85V to 5.4V
– Consumption: 8 mA Typical, 150 mA Max - Smart Card Powered
– Power Down Mode
• 100 µA Max Power Down Current
• Power-down/Power-up by Host Command
Additional Features
– Operating Temperature Range: 0° to +70° (-40° to +85°
C
C
C
C)
– Package: SS0P24, QFN32
– LED Management: The LED is On When the Card is Powered On
•
GemCore Serial
Lite PRO
AT83C21GC
Summary
•
•
•
Description
AT83C21GC is designed to simplify the integration of smart card interfaces in elec-
tronic devices.
It manages the electrical interface and communication with ISO 7816 –1/2/3/4 com-
patible smart cards and memory cards.
Figure 1.
Basic Architecture of a Smart Card Reader
Host
Processor
AT83C21GC
Smart Card
Smart Card
Connector
4247DS–SCR–03/07
This is a summary Document. A complete document is
available on the Gemplus Web site. www.gemplus.com
ATMEL [ ATMEL CORPORATION ]
