Functional Description
Single Device Mode
A single M67206H may be used when the application requirements are for 16384 words
or less. The M67206H is in a Single Device Configuration when the Expansion In (XI) control
input is grounded (see Figure 2). In this mode the Half-Full Flag (HF), which is an active low
output, is shared with Expansion Out (XO).
Figure 2. Block Diagram of Single 16384 bits × 9
HF
(HALF-FULL FLAG)
(W)
9
(R)
(Q)
READ
WRITE
HF
9
DATAOUT
DATAIN
(I)
(EF)
(RT)
EMPTY FLAG
RETRANSMIT
FULL FLAG (FF)
(RS)
RESET
EXPANSIONIN(XI)
M67206H
Width Expansion Mode
Word width may be increased simply by connecting the corresponding input control sig-
nals of multiple devices. Status flags (EF, FF and HF) can be detected from any device.
Figure 3 demonstrates an 18-bit word width by using two M67206H. Any word width can be
attained by adding additional M67206H.
Figure 3. Block Diagram of 16384 bits x 18 FIFO Memory Used in Width Expansion Mode
H
Note:
Flag detection is accomplished by monitoring the FF, EF and the HF signals on either (any) device used in the width expansion
configuration. Do not connect any output control signals together.
6
M67206H
4143J–AERO–04/07
ATMEL [ ATMEL ]
