Description
(Continued)
Two additional product terms are included to provide syn-
chronous preset and asynchronous reset. These terms
are common to all 10 registers. All registers are automat-
ically cleared upon power up.
Register preload simplifies testing. A security fuse pre-
vents unauthorized copying of programmed fuse patterns.
Absolute Maximum Ratings*
Temperature Under Bias.................-55
o
C to +125
o
C
Storage Temperature......................-65
o
C to +150
o
C
Voltage on Any Pin with
Respect to Ground........................ -2.0 V to +7.0 V
(1)
Voltage on Input Pins
with Respect to Ground
During Programming................... -2.0 V to +14.0 V
(1)
Programming Voltage with
Respect to Ground...................... -2.0 V to +14.0 V
(1)
Integrated UV Erase Dose .............. 7258 W
•
sec/cm
2
*NOTICE: Stresses beyond those listed under “Absolute Maxi-
mum Ratings” may cause permanent damage to the device.
This is a stress rating only and functional operation of the
device at these or any other conditions beyond those indi-
cated in the operational sections of this specification is not
implied. Exposure to absolute maximum rating conditions
for extended periods may affect device reliability.
Note:
1. Minimum voltage is -0.6 V dc which may undershoot to -2.0
V for pulses of less than 20 ns. Maximum output pin voltage
is V
CC
+0.75 V dc which may overshoot to +7.0 V for pulses
of less than 20 ns.
Logic Options
Output Options
D.C. and A.C. Operating Conditions
Commercial AT22V10/L
-15, -20, -25
Operating Temperature (Case)
V
CC
Power Supply
0
o
C - 70
o
C
5 V
±
10%
Industrial AT22V10/L
-15, -20, -25
-40
o
C - 85
o
C
5 V
±
10%
Military AT22V10/L
-15, -20, -25, -30
-55
o
C - 125
o
C
5 V
±
10%
1-98
AT22V10/L
ATMEL [ ATMEL CORPORATION ]
