[Preliminary] ATMOS -2M60/2M30
6.4.2
Camera Settings Memory
ATMOS cameras have 5 banks to save settings:
• Bank 0 contains the factory settings. This bank cannot be modified by the user
• Bank 1 to 4 are used to store 4 different settings
• Bank 1 might be protected by an advanced user (see Register @ 104H). Contact Atmel for
details
7. Connector Description
All connectors are on the rear panel. Better results are obtained by using shielded cables (foil
and braid shielded).
Note: cables for digital signals shall be twisted pairs.
7.1
Power Supply
Camera connector type: Hirose HR10A-7R-6PB (male)
Cable connector type: Hirose HR10A-7P-6S (female)
Figure 7-1. Power Supply Pinout
Power Connector : J01
Signal
PWR
NC
Pin
1
Signal
GND
NC
Pin
4
2
5
PWR
3
GND
6
1
6
5
2
3
4
Receptacle Viewedfrom Camera Back
19
5440A–IMAGE–10/05