Putting the Board in the Program Mode
1. Plug in the secure personalization board while holding the Boot Select button.
Holding the Boot Select button located on the back of the board while powering the board will put the
board in the programming mode. The below image shows what should be shown on the display.
2. Download the file contents to the programmer board.
Select the ACES Programmer desktop icon to launch the ACES Programmer.
The Personalize Programmer Board dialog box will then be presented.
Notes: 1. The board is attached.
2. The file is not selected.
Select the
button and select a personalization file.
(Select the file that you have created using ACES CE)
Atmel AT88CK9000 Secure Personalization Kit for CryptoAuthentication [User Guide]
9
8821A–CRYPTO–6/12
ATMEL [ ATMEL ]
