50W Medical Grade Desktop Switching Power Adapters
AMP500 series
INPUT SPECIFICATIONS
GENERAL SPECIFICATIONS
Input Voltage Range
Frequency Range
Input Current
90-264 VAC
Isolation
I/P-O/P: 4000VAC
I/P-Ground: 1500VAC
100 Mohm
47-63 Hz
(115/230 VAC Input @ FL) 1.6 / 1.0A
Isolation Resistance
Efficiency
Inrush Current, typ (Cold Start)
115VAC Input
83% typ.
12 Amps (15Amps Max.) *
26 Amps (30 Amps Max.) *
0.1mA typ. @ 240VAC
Safety
UL60601-1, EN60601-1
230VAC Input
Leakage Current
PHYSICAL SPECIFICATIONS
Size
5.75” x 3.0” x 1.7”
Desktop Style
OUTPUT SPECIFICATIONS
Construction
Weight
Voltage and Current
Load Regulation
See Selection Charts
See Selection Charts
+/- 0.5%, typ (1% Max.)
+/-0.04%/°C, typ
11.4 oz (325g)
Line Regulation
ENVIRONMENTAL SPECIFICATIONS
Temperature Coefficient
Ripple/Noise
0.5% Pk-Pk, typ (1% Max.)
112-132% (O/P 1 only) *
110-150% of Rated Current
Oper. Temperature
0 to +70°C
Over Voltage Protection
Over Current Protection
Transient Response
Start Up Time (min./typ./max.)
Hold Up Time
See Derate Curve
-40 to +85°C *
5 to + 95%, non-cond *
Vin = 220VAC
Storage Temperature
Relative Humidity
EMC
50% to 100% Load
0.3/1/2 Seconds
4mS
CISPR-11 B
FCC Part 18 B
16-20mS at 110VAC Input
Vin = 110VAC
100,000 Hrs
MTBF
OUTPUT DERATING CURVE
All specifications are typical at nominal input, full load, and 25°C unless other-
wise noted
* These are stress ratings. Exposure of the devices to any of these conditions
may adversely affect long term reliability. Proper operation under conditions
other than the standard operating conditions is neither warranteed nor implied.
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458
WWW.ASTRODYNETDI.COM
ASTRODYNE [ ASTRODYNE CORPORATION ]
