30W 3rd Edition Medical Grade Desktop Switching Power Adapters
AMP310 series
INPUT SPECIFICATIONS
PHYSICAL SPECIFICATIONS
Input Voltage Range
Frequency Range
90-264 VAC
47-63 Hz
Size
4.65”L x 2.56”W x 1.58”H
Desktop Style
Construction
Weight
Leakage Current
0.1mA typ. @ 240VAC
0.9A
16.22oz (460g)
Input Current Lowline
Input Current Highline
Inrush Current Lowline
Inrush Current Highline
No-Load Power Consumption
0.34A
ENVIRONMENTAL SPECIFICATIONS
15A max.
38A max.
Oper. Temperature
0 to +70°C
0.5 Watts Max.
See Derate Curve
-40 to +85°C *
0 to + 95%, non-cond *
220VAC in: CISPR-11B
110VAC in: FCC18B
V
Storage Temperature
Relative Humidity
EMI
OUTPUT SPECIFICATIONS
Voltage and Current
See Selection Charts
0-FL Single Outputs
10% Multi-Outputs
See Selection Charts
± 0.5%, typ (1% Max.)
0.5% Pk-Pk, typ (1% Max.)
12mS min. at 110VAC Input
1.5S typ. (2S max.)
112-132%
Minimum Load Required
Efficiency Level*
MTBF (MIL-HDBK-217F, 25°C) 100,000 Hours
Load Regulation*
Line Regulation
OUTPUT DERATING CURVE
Ripple/Noise
Hold Up Time
Start Up Time
Over Voltage Protection
Over Current Protection
Transient Response (FL-1/2L)
Temperature Coefficient
110-150%
4mS @ 100VAC Input
±0.04%/°C, typ.
GENERAL SPECIFICATIONS
Isolation
I/P-O/P: 4000VAC
I/P-GND: 2000VAC
50MΩ
Isolation Resistance
Efficiency*
83% typ.
Safety
ANSI/AAMI ES 60601-1: 2005 (UL/cUL 3rd Edition)
EN 60601-1:2006 (TUV/T-mark 3rd Edition)
All specifications are typical at nominal input, full load, and 25°C unless other-
wise noted
* These are stress ratings. Exposure of the devices to any of these conditions
may adversely affect long term reliability. Proper operation under conditions
other than the standard operating conditions is neither warranteed nor implied.
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458
WWW.ASTRODYNETDI.COM