1 2 0 W, S in gl e O utpu t, 2 Ch a nnel, Class 2 LE D Dri v er s
INPUT SPECIFICATIONS
Input Voltage ALD120
Max. Iin
Input Frequency
Max. Inrush Current
Power Factor
90-264 VAC (120/240 VAC Nominal)
1.6A @ 100 VAC Input
47-63Hz
30A @ 230VAC Input
25°C, cold start-up
99%, typ.
ALD120
series
ENVIRONMENTAL SPECIFICATIONS
MTBF
Cooling
Operating Temp.
Storage Temperature
Relative Humidity
55K Hrs, FL @ 25°C ambient,
Based on MIL-217F
Convection
-20°C to +60°C FL
-40°C to +85°C
5% to 95%
OUTPUT SPECIFICATIONS
Output Voltage/Current
Output Voltage Adjust
Max. Output Power
Ripple / Noise
Efficiency
Hold Up Time
Start Up Time
Transient Response
Line Regulation
Voltage Mode Load Regulation
See Model Chart
+10/-25%
See Model Chart
See Model Chart
80% min. @ FL, 230 VAC Input
16mS @ FL, 100 VAC Input
1 Second, typ.
4mS, FL to 1/2L, 100 VAC Input
±1% max.
±5% max., (Voltage setting Adjust-
able via on board pot +5/-25%)
Over Current Protection
105% Max per channel (Hiccup-
mode, Auto-Recovery upon
removal of over current condition.*
Constant Current Mode Regulation
±3% max., (Current setting Adjust-
able via on board pot +5/-90%)
Over Voltage Protection
132% max.
*
Short Circuit Protection
Hiccup Mode, Auto Recovery upon
removal of over current condition.
*
PHYSICAL SPECIFICATIONS
Case / Design / Material
NEMA 3 Design / Aluminum /
Potted with AC and DC Wiring
Compartments
Flange Mount, AC/DC Conduit
Entries, Knockouts for 1/2”
Conduit and Fittings
11”L x 3.37”W x 2.19”H
3.6 lb (1633g)
Mounting and Connection
Size
Weight
COMPLIANCE / SAFETY
EMI / RFI
Safety Standards
CISPR-22B, FCC-15B EMC
EN61000-3-2 (EMC)
UL/CUL 1310/1585, Class 2,
Outdoor Wet Locations
for UL 48 LED Lighting, CE
EN60529 - Weatherability of an
Enclosure - Rated to IP65
Weatherability Standard
*
These are stress ratings. Exposure of the devices to any of these conditions
may adversely affect long term reliability. Proper operation under conditions
other than the standard operating conditions is neither warranteed nor implied.
All specifications are typical at nominal input, full load, and 25DegC unless
otherwise noted
Astrodyne products are not authorized or warranteed for use
as critical components in life support systems, equipment used
in hazardous environments, nuclear controls systems, or other
mission-critical applications.
WWW.ASTRODYNE.COM
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458
ASTRODYNE EUROPE: 353 51 561060
ASTRODYNE [ ASTRODYNE CORPORATION ]
