AA60A
60 Watts
AA60A Series - WIde Input - Dual Output
Total Power
Input Voltages
# of Outputs
60 Watts
24V TO 48V
Dual 5V/3.3V & 3.3V/2.5V
SPECIAL FEATURES
ELECTRICAL SPECIFICATIONS
•
•
•
•
•
•
•
•
•
Output loadsharing
Input
24V and 48V DC Input
Unencapsulated 2.3” x 2.4” x 0.50” pkg.
100°C baseplate temperature
Trim feature, both rails
Industry standard pin-out
Enable (on/off)
Input range ............................ 19 to 60 VDC (36Vdc Nom.)
Input capacitance .................. 6.8µF (typical)
Efficiency ............................... 77%-3.3V Full load, 84%-5.0V Fulll load
Input reverse ......................... Fuse recommended 3A.MB
Voltage protection
Input surge voltage ............... 100V for 100mS
Input reflected ripple ............. <200mA (P-P)
Thermal protection
Output
Voltage tolerance .................. + 1%
ENVIRONMENTAL
Operating case temperature range:
-40°C to +105°C
Line regulation ...................... ±0.2%(Typ), 1.0%(Max)
Low Line - High Line @ Full Load
Load regulation ..................... 1.0%
Storage temperature: -40°C to +105°C
Humidity: 5% to 100% (non-condensing)
(10% to 100% load)
1A minimum load per rail required
Ripple/noise .......................... 100mV P-P(max)
Temperature coefficient ......... +0.02%/°C (max)
Short circuit protection .......... Continuous - Power Cycle
Overvoltage protection .......... Shutdown (latching)
Transient response ............... 4% Vo max recovery <100µsec
(25% to 75% step load change)
SAFETY
UL
UL 1950
CAN22.2-950
TUV
EN60950
Switching frequency .............. 375 kHz typical
Control
Enable ................................... on =2.5 to 5.5Vdc or open circuit
off = 0 to 0.8Vdc
Ref. to -Vin. TTL compatable
Input current (enable off) ....... <2ma.
Output trim ............................ Both outputs ±10% minimum
Thermal shutdown ................ 110°C typ (baseplate temperature)
Auto reset
Isolation
I/O isolation ........................... 1500 VDC
Isolation resistance ............... 1 x 109 ohms
Advance Copy
164
USA: 1-888-41-ASTEC
Europe (UK): 01384-842211
Asia (HK): 852-2437-9662