6
- Function Details -
Support for connection to PCs via Ethernet
The
8826
can be connected to Ethernet, a standard
network protocol in the Internet age
(using the optional
LAN CARD
and
LAN COMMUNICATOR
9333)
. For those who
frequently analyse measurement data on PCs, this
function offers a good match. Also, connection to PCs
using RS-232C connection or GP-IB connection is
possible
(using the optional
RS-232C CARD
9557
and
GP-IB
CARD
9558)
.
8826
data can be sent to PCs or be remotely
controlled from PCs.
* Because LAN card, GP-IB card, and RS-232C card all use the same PC card slot of
8826,
when one of them is inserted into the PC card slot, then any memory card cannot be used at the
same time.
■
Connect HiCORDER to departmental LAN
(using TCP/IP communication protocol)
Ethernet
Copy or remote operations of HiCORDER data files
from client PCs running
9333
(software)
Color image output to the
network printer
■
Save data to network server
(using TCP/IP communication protocol)
PC running
9333
(software)
Copy measurement data files obtained from
HiCORDER to PC on network
Offline data exchange with PCs
The supplied waveform viewer (PC application) can
convert saved waveform data to text files (CSV format).
For data storage, the FD/PC card (supplied as standard)
can be used. This allows easy offline data exchange with
PCs.
Note: The optional MO drive is discontinued.
* In addition to
HiCORDER's
read/write native file (binary format), data can
also be saved to text files (CSV format) which can be opened by PC spreadsheet
applications, or waveform bitmap files (BMP format). However, because data
saved in text files cannot be read by
HiCORDER,
it is recommended that text
data conversion be performed on PCs.
Memory / main unit
Memory / main unit
Floppy disk
Memory / main unit
Flash ATA PC card
Scaling Functions
Actual measurements usually involve parameters other
than voltage. Various physical parameters such as
speed, vibration and temperature commonly need to be
recorded, and this signal data should be directly readable,
without having to be manually converted. In such
measurement conditions, the scaling function can be used
to automatically convert to the desired parameter value.
Additionally, waveform amplitude can be adjusted using
the Variable Gain function.
In addition, if accurate input voltage amplitude
measurement is not required, the amplitude can be
intentionally modified with the Vernier Adjustment
function.
Scaling
Approx. Display
Input Voltage
Upper Limit Value
Lower Limit Value
Variable
Variable OFF
Variable ON
Shrink
Vernier
Expand
ASM-SENSOR [ ASM GMBH ]
