The Standard for Recorders
The
8205
-10
can be used for basic recording in a wide range of applications, with
features such as a wide AC/DC measurement range of 0.1V to 500V, an analog level
monitor function, and a special clamp-on probe for recording large currents.
lRange:AC/DC
0.1V to 500V (AC 10A to 500A when using the 9651, AC 10A to 1000A when using
the 9668)
lInput
Channels: One, for voltage or current
lPaper
Feed Speed: 20 cm/min to 2 cm / hr
lSampling
Frequency: 10ms
Depending on your application
,
select either the 8205
-10
for general applications or the 8206
-10
for power lines.
:
For Recording AC Voltage, DC Voltage, or AC Current on a Single Channel
Easy viewing of the
input level with a full-
range level monitor.
For DC measurement,
the zero position can
be changed in steps
that are -20% of the
range, which is convenient for tasks such as
recording both polarities.
Example of a level display for the DC 10V range
0%
Measurements are possible
from -9V to 11V by moving the
zero position.
-40%
Intermediate position
-80%
Minimum position
Standard position
11V
• Range and mode setting data is
printed every 10 divisions.
• Voltage or current values can be
read directly from the vertical axis
scale.
• Time is printed every 5 divisions.
• Interval printing of average values
on a g r id with points ever y 2
divisions.
0V
-9V
:
For 2-Channel Special Purpose Recording of AC Voltage and Current from Power Lines
The
8206
-10
provides simultaneous voltage and current measurement (a frequent requirement
For voltage measurements,
of power line management) along with a zoom function that allows 2X recording centered
the display can be
around the range value. Providing ranges that are expressly intended use with power lines, the
expanded from 25% to
instrument is capable of recording voltages of up to 600V.
-35% around the center
lRange:
AC 100V, 200V, or 500V (AC 10A to 500A when using the 9651, AC 10A to 1000A when
using the 9668)
lInput
Channels: Two, for simultaneous recording of voltage and current
lPaper
Feed Speed: 60 cm/hr to 2 cm/hr
lSampling
Frequency: 10ms
of the range. The
center va lue ca n be
changed in steps that
are -10% of the range, which is convenient when
it is necessary to adjust the measurement position
for electric circuits with different rated voltages.
Example of a level display for the 200V range
M e a su re m e nts a re p o s s i b l e
from 90V to 90V by changing
the center value.
290V
0%
+20%
Maximum position
Standard position
• Range and mode setting data is
printed every 10 divisions.
• Voltage or current values can be
read directly from the vertical
axis scale.
• Time is printed every 5 divisions.
• Interval printing of average values
on a gr id with points ever y 2
divisions.
Minimum position
-20%
200V
90V
ASM-SENSOR [ ASM GMBH ]
