3
High Performance in a Compact Package
7075 Application Functions
q
Sweep Sequence Functions
Waveform amplitude, frequency, offset
and duty cycle* can be swept
simultaneously, so multi-pattern signals
can be easily generated.
* Duty cycle setting applies only to pulse
waveforms.
• Table-style entry of up to 128 steps
• Settable step loop time
• Sequence control by external signals
• Long-duration sweep and high-speed data refresh
Sweep time of 0.01 ms to 1000 s
Maximum data refresh speed of 1
µs
Example of simultaneous amplitude
and frequency sweep setting
Output waveform example
CH1: Simultaneous sweep of amplitude
and frequency of a sine wave
CH2: Duty cycle sweep of a pulse wave
q
Trigger Functions
When Hold is enabled for a sequence loop,
the Hold can be canceled by the trigger.
Specifically, an external trigger can be
applied to each channel independently, so
variations can be imposed on the output
according to custom timing differences
between channels.
This function is useful in, for example, an
automobile ABS simulation in which
signals for the four wheels can be
controlled independently.
TRIG
CH 1
TRIG
CH 2
TRIG
CH 3
TRIG
CH 4
Output controlled by custom timing
Output timing can be controlled by
trigger input for each channel at the
external control terminals on the rear
panel.
q
Low-Pass Filter Functions
14 types of low-pass filter with 1-2-5
progression are built in.
Device testing capabilities are enhanced
by selectably filtering the test signal, such
as for noise tests.
14 types of low-pass filter