4
■
Measurement Ranges and Accuracy
: Resistance and voltage
: Four-terminal AC (1-kHz) method
:
ΩV, Ω
and V
: ±22 V DC rated input voltage
±70 V DC maximum rated voltage above ground
: Approx. 1 MΩ
: Four steps – Extra Fast, Fast, Medium or Slow
: Approx. 3 ms for resistance measurements
Approx. 3 ms for voltage measurements
■
Specifications
Measurement types
Resistance measurement method
Functions
Rated voltage
Input impedance
Sampling rate
Response time
[ Resistance Measurement ]
3
Ω
300 mΩ
Range
Max. Display
310.00 mΩ 3.1000
Ω
0.1 mΩ
Resolution
0.01 mΩ
Meas. Current
10 mA ±10% 1 mA ±10%
1 kHz ±0.2 Hz
Meas. Current Freq.
±0.5% rdg. ±5 dgt.
Accuracy*
1
Open-Terminal
7 V peak
Voltage
[ Voltage Measurement ]
20 V
Range
±19.9999 V
Max. Display
0.1 mV
Resolution
2
±0.01% rdg.±3 dgt.
Accuracy*
*1 Add ±3 dgt for EX FAST, or ±2 dgt for FAST and
MEDIUM
*2 Add ±3 dgt for EX FAST, or ±2 dgt for FAST and
MEDIUM
Note: Response time depends on reference values and the
measurement object.
: Sampling time + Response time
: 1000-count range (both resistance and voltage)
: Internal or external
: On/off, 0 to 9.999 seconds
: On/off, 2 to 16 samples
: Total data count; valid data count; maximum, minimum
and average values; standard deviation; population
standard deviation and process capability indices
Measurement value
: Measurement values are output via RS-232C upon
trigger input
output function
Measurement value memory
: Up to 400 measurements
: Up to 126 configuration settings
Panel save/load
: External I/O, RS232C (9600, 19200 or 38400 bps)
External interface
Printer RS-232C (all models), GP-IB (Model 3561-01 only)
: Over-range display, measurement error detection, self-
Other functions
calibration, dual comparators, key-lock
Total measurement time
Zero-adjustment
Triggering
Delay time
Averaging samples
Statistical calculations
[
Conditions of Guaranteed Accuracy
]
Temperature & humidity:
23 ˚C ±5 ˚C, 80% rh or less (non-condensating)
Zero-adjustment:
After executing zero-adjustment
Warm-up time:
At least 30 min.
Self-calibration:
Unless using SLOW sampling, execute self-calibration after warm-up and
restrict temperature fluctuations to within ±2 ˚C after calibration.
[ Sampling Times ]
Sampling
(50 Hz)
Ω
V
(60 Hz)
(50 Hz)
Ω
(60 Hz)
(50 Hz)
V
(60 Hz)
EX.FAST
7 ms
4 ms
4 ms
FAST
23 ms
12 ms
12 ms
MEDIUM
83 ms
69 ms
42 ms
35 ms
42 ms
35 ms
SLOW
258 ms
251 ms
157 ms
150 ms
157 ms
150 ms
■
General Specifications
Operating temperature
& humidity
Storage temperature &
humidity
Guaranteed accuracy
temperature & humidity
Operating conditions
Rated supply voltage
Rated supply frequency
Rated power consumption
Insulation withstand
potential
: 0 to 40˚C, 80% rh or less (non-condensating)
: -10 to 50˚C, 80% rh or less (non-condensating)
: 23˚C ±5˚C, 80% rh or less (non-condensating)
: Indoors, below 2000 m ASL
: 100 to 240 V AC (auto-selecting)
: 50/60 Hz
: 30 VA
: 1.69 kV AC for 15 s (with 10 mA cut-off current) between
power supply line and protective ground terminal
Items in the parentheses () indicate supply frequency settings; Tolerance: ±5 ms for SLOW sampling,
and ±1 ms for other settings.
Dimensions
Mass
Accessories
Applicable Standards
: Approx. 215W× 80H× 295D mm (excluding projections)
: Approx. 2.4 kg
: Power Cord (1)
: Safety: EN61010-1:2001
EMC: EN61326:1997+A1:1998+A2:2001 Class A
EN61000 -3-2:2000, EN61000 -3-3:1995+A1:2001
Effect of radiated radio frequency
electromagnetic fields: 10 V/m
Resistance measurements: ±3% rdg. ±1000 dgt.
Voltage measurements: ±0.01% rdg. ±20 dgt.
Effect of conducted radio frequency
electromagnetic fields: 3 V
Resistance measurements: ±0.5% rdg. ±100 dgt.
3561 BATTERY HiTESTER
3561-01 BATTERY HiTESTER (w/GP-IB)
●
Options
9287-10 CLIP TYPE LEAD
9452 CLIP TYPE LEAD
9453 FOUR TERMINAL LEAD
9455 PIN TYPE LEAD
(for ultra precision)
9467 LARGE CLIP TYPE LEAD
9770 PIN TYPE LEAD
9771 PIN TYPE LEAD
9637 RS-232C CABLE
(9pin-9pin/cross/1.8m)
9638 RS-232C CABLE
(9pin-25pin/cross/1.8m)
9151-02 GP-IB CONNECTOR CABLE
(2m)
9151-04 CONNECTOR CABLE
(4m)
9670 PRINTER
9671 AC ADAPTER
(for 9670)
9672 BATTERY PACK
(for 9670)
9673 BATTERY CHARGER
(for 9672)
9237 RECORDING PAPER
(80 mm × 25 m, 4 rolls)
• Measurement leads are not included. Purchase the appropriate lead option for your
application separately.
• The male (system side) of the EXT I/O connector is also available. Please inquire with
your HIOKI distributor.
9287-10
9452
9453
Cable length : connectors to lead
branch approx. 85 cm, lead branch
to probes approx. 8 cm
Cable length : connectors to lead
branch approx. 80 cm, lead branch
to probes approx. 20 cm
Cable length : connectors to lead
branch approx. 80 cm, lead branch
to probes approx. 30 cm
9455
9467
29 dia.
Cable length : connectors to lead
branch approx. 40 cm, lead branch
to probes approx. 25 cm
Cable length : connectors to lead
branch approx. 85 cm, lead branch
to probes approx. 25 cm
9770
9771
Cable length : connectors to lead
branch approx. 45 cm, lead branch
to probes approx. 26 cm
Cable length : connectors to lead
branch approx. 45 cm, lead branch
to probes approx. 26 cm
DISTRIBUTED BY
HEAD OFFICE :
81 Koizumi, Ueda, Nagano, 386-1192, Japan
TEL +81-268-28-0562 / FAX +81-268-28-0568
E-mail: os-com@hioki.co.jp
HIOKI USA CORPORATION :
6 Corporate Drive, Cranbury, NJ 08512 USA
TEL +1-609-409-9109 / FAX +1-609-409-9108
E-mail: hioki@hiokiusa.com
Shanghai Representative Office :
1704 Shanghai Times Square Office
93 Huaihai Zhong Road
Shanghai, 200021, P.R.China
TEL +86-21-6391-0090, 0092
FAX +86-21-6391-0360
E-mail: info@hioki.cn
All information correct as of Jun. 30, 2005. All specifications are subject to change without notice.
3561E1-56E-05U
Printed in Japan
ASM-SENSOR [ ASM GMBH ]
