2
The HIOKI AC/DC POWER HiTESTER Solves All of
All the Features for DC and Current/Power Integration Measurements
■
3334 AC/DC POWER
Complete Accuracy Over a Wide Input Range
1.00mA
0.150V
0.0000W
Current: 1mA to 30A, Voltage: 0.15V to 300V, Apparent Power: 0W to 9kW
All Measurements Within this Range Fully Guaranteed for Accuracy
30.00A
300.0V
9.000kW
■
Measure AC or DC Loads
■
Capture
With a DC to 5kHz frequency bandwidth, all AC and DC
measurement and AC/DC elements such as half-wave rectified
values can be tested reliably and accurately
[AC+DC Mode]: For half-wave rectified loads common in small
household appliances such as hair dryers
[DC Mode]: For pure DC loads in batteries
[AC Mode]: For loads in commercial power lines powering
common household appliances
Switch modes simply by pressing the DC/AC button on the panel
Half-wave rectified
0.0 A
Inrush Current with the Peak
Measurement Function
Measure for the Peak Value of Voltage and Current for Each Polarity
Indepedently. Also measure the inrush current or surge current of electrical
equipment.
Measure simply by pressing the SHIFT+HOLD keys.
inrush current
Measure the inrush current when copiers
and similar equipment are started
peak current
All waves rectified
0.0 A
Some hair dryers operate by switching
the output by a half-wave rectified.
Measure the peak current of the standby
power of home entertainment devices
80% of Actual Size Shown
■
Intuitive
Setting Procedures and Easy-to-Understand Displays
Both the 3333 and 3334 offer simple operating procedures and quick and easy-to-understand readings and alarm displays. Settings can be made
for obtaining the average of captured data (AVG), VT ratio (conversion ratio), CT ratio, GP-IB address, integration time (from 1 minute to 10,000
hours), and D/A Output Parameters. Information regarding the Power HiTESTER's currents status such as display hold, remote control settings, and
key lock (to prevent unauthorized reconfigurations) can be viewed at a glance.
*Easily test for over-consumption even when testing distorted waveforms that are commonly found in switching power supplies and similar devices by
monitoring for the [PEAK OVER] alarm, simply by setting for the alarm to activate and the display to light up when the input exceeds the range.
ASM-SENSOR [ ASM GMBH ]
