7
s
Accuracy (
Current measurement )
s
Operating temperature and humidity for guaranteed accuracy: 23 ± 5 ºC, 80%rh or lower (no condensation)
s
Temperature coefficient: 0.1 x basic accuracy x (T-23) weighted --- operating temperature T (ºC)
s
Warm-up time: 30 min.
s
Value calculated based on voltage detected at terminals of Network having non-inductive resistance of 1 kΩ
(theoretical value).
s
Measurements in voltmeter mode conform to the following accuracy level.
q
Measurement of DC
Range
Guaranteed Measurement
accuracy range resolution
Accuracy
q
Measurement of AC*
1
, AC+DC
Range
Guaranteed Measurement
accuracy range resolution
Accuracy
25.00 mA
5.000 mA
500.0 µA
50.00 µA
100kHz
<
f
≤
1MHz
±(2.0%rdg.+10dgt.)
±2.0%f.s.
4 mA or more
400 µA or more
40 µA or more
4 µA or more
10 µA
1 µA
0.1 µA
0.01 µA
±(0.2%rdg.+3dgt.)
±1.0%f.s.
DC
<
f
≤
100kHz
±(2.0%rdg.+6dgt.)
±2.0%f.s.
2
25.00 mA
5.000 mA
500.0 µA
50.00 µA
4 mA or more
400 µA or more
40 µA or more
4 µA or more
10 µA
1 µA
0.1 µA
0.01 µA
q
Power supply voltage monitor accuracy
Range
Guaranteed Measurement
accuracy range resolution
Accuracy
q
Measurement of AC Peak*
Range
Guaranteed Measurement
accuracy range resolution
300.0 V
Accuracy
85 Vor more*
3
0.1 V
±(2.0%rdg.+10dgt.)
q
Current consumption monitor accuracy
(measurement method: average value response, effective value conversion)
20Hz
<
f
≤
1kHz
±(2.0%rdg.+2dgt.)
±2.5%f.s.
±4.0%f.s.
1kHz
<
f
≤
10kHz
±(5.0%rdg.+10dgt.)
±5.0%f.s.
75.0 mA
10.00 mA
1.000 mA
500.0 µA
8mA or more
0.8mA or more
100 µA or more
40 µA or more
100 µA
10 µA
1 µA
0.1 µA
Range
Guaranteed Measurement
accuracy range resolution
Accuracy
16 A
0.5Aor more*
4
0.1 A
±(2.0%rdg.+5dgt.)
*1: Weighted with frequency characteristic (fc = 4 Hz) of high-pass filter.
*2: Cannot be set when network A , B and C(filter off) is selected.
*3: "less than 80 V" is indicated for a value less than 80 V.
*4: "less than 0.5 A" is indicated for a value less than 0.5 A.
s
General Specifications
Display section
Operation section
Operating temperature
and humidity
Storage temperature
and humidity
Recommended
Calibration Period
Operating Environment
Power source for
main unit
: 320
×
240 dot matrix LCD (with backlight)
: 6
×
6 matrix touch panel
: 0 to 40 ºC , 80%rh or less (no condensation)
: -10 to 50 ºC, 80%rh or less (no condensation)
: 6 months
Applicable Standards
: EMC: EN61326:1997+A1:1998+A2:2001
EN61000-3-2:2000
EN61000-3-3:1995+A1:2001
Safety: EN61010-1:2001
EN61010-2-031:1994 Pollution Degree 2
Terminals T1, T2: Measurement category II
(Anticipated Transient Overvoltage: 2.5 kV)
Terminal T3: Measurement category I
(Anticipated Transient Overvoltage: 1.5 kV)
: 16%f.s. at 3 V
Effect of conducted
radio-frequency
(typical value for measurement in AC 500 mA range)
electromagnetic field
: 9170 TEST LEAD 2 sets, 9195 ENCLOSURE
Accessories
PROBE 1, 9399 CARRYING CASE 1, Alligator
clips 3 (2 red, 1 black), AC power cord 2 (for
main unit, for power line of sample equipment),
Spare fuse 2 (for main unit power supply 250V
T0.1AL, for measurement operation 250V
T32mAL)
: Approx. 320W
×
110H
×
263D mm
Dimensions
: Approx. 4.0kg
Mass
: Indoors, <2000 m ASL
: 100, 120, 220, 240 VAC (default setting)
Rated power source frequency: 50/60 Hz
Rated power: 30 VA
Power line for sample
: 100 to 240 VAC
equipment and power
Rated power source frequency: 50/60 Hz
output
Rated power: 1,500 VA
Power output maximum
: 25 mA
allowable leakage current
Withstand voltage
: [All power supply terminals] - [Protective earthing]
1.35 kV AC (5 mA), 1 min.
[All measurement terminals] - [All power supply terminals]
2.30 kV AC (5 mA), 1 min
[All measurement terminals] - [Control circuit]
2.30 kV AC (5 mA), 1 min
3156 LEAK CURRENT HiTESTER
q
Options
9637 RS-232C CABLE (9-pin to 9-pin., crossing cable,1.8m)
9638 RS-232C CABLE (9-pin to 25-pin., crossing cable,1.8m)
9151-02 GP-IB CABLE (2 m)
9151-04 GP-IB CABLE (4 m)
9442 PRINTER
9443-01 AC ADAPTER (for printer, for use in Japan)
9443-02 AC ADAPTER (for printer, for use in EU)
9443-03 AC ADAPTER (for printer, for use in U.S.)
9195 ENCLOSURE PROBE
(Standard accessory)
9170 TEST LEAD
(Standard accessory/2 set)
9399 CARRYING CASE
(Standard accessory)
9686 CARRYING CASE
(Option)
9444 CONNECTION CABLE (for printer)
1196 RECORDING PAPER (for printer)
9686 CARRYING CASE (with casters)
9267 SAFETY TEST DATA MEASUREMENT SOFTWARE
DISTRIBUTED BY
HEAD OFFICE :
81 Koizumi, Ueda, Nagano, 386-1192, Japan
TEL +81-268-28-0562 / FAX +81-268-28-0568
E-mail: os-com@ hioki.co.jp
HIOKI USA CORPORATION :
6 Corporate Drive, Cranbury, NJ 08512 USA
TEL +1-609-409-9109 / FAX +1-609-409-9108
E-mail: hioki@ hiokiusa.com
Shanghai Representative Office :
1704 Shanghai Times Square Office
93 Huaihai Zhong Road
Shanghai, 200021, P.R.China
TEL +86-21-6391-0090, 0092
FAX +86-21-6391-0360
E-mail: hioki-sh@81890.net
All information correct as of Jun. 20, 2003. All specifications are subject to change without notice.
3156E2-36M-05P
Printed in Japan
ASM-SENSOR [ ASM GMBH ]
