NLP110 Medical Series
S i n g l e a n d t r i p l e o u t p u t
LOW TO MEDIUM POWER AC/DC POWER SUPPLIES 80-110W AC/DC Universal Input Switch Mode Power Supplies
1
• Provides low voltage outputs
• Compliance to EN61000-3-2 (Power Factor = 0.98)
• Smallest industry standard package 6.5 x 3.0 x 1.26 inches
• 90VAC to 264VAC universal input range
• UL, cUL, and VDE safety approvals and CE-Marked to MDD
• Overvoltage and short circuit protection
• VDE0871-A, EN55022-A, EN55011-A conducted noise
• VDE0871-A, EN55022-A, EN55011-A radiated noise
• Meets all applicable and relevant immunity standards
EN61000-4-2,4,5 and 6
The NLP110 Medical is a series of 110W AC/DC open-frame power supplies in a
3” x 6.5” x 1.26” package. The NLP110 Medical is power factor corrected to meet EN61000-3-2
and is available in single and multiple output models. The multiple output models have a capability
that is unique to the power supply market - they can deliver equal amounts of current on multiple
low voltage outputs to support designs that will span the industry transition from 5V logic to 3.3V
logic. The NLP110 Medical is practically the same size as a 65 Watt 3” x 5” product, e.g. NLP65
Medical - the one difference is that the footprint is a mere 1.5 inches longer. The NLP110 Medical
series, with full medical safety approval per UL2601-1, C22.2 No. 601.1-M90, VDE0750,
IEC60601-1 and EN60601-1 and CE marked, greatly accelerating design-in time and reducing
system compliance costs.
2 YEAR WARRANTY
All specifications are typical at nominal input, full load at 25°C unless otherwise stated
SPECIFICATIONS
OUTPUT SPECIFICATIONS
EMC CHARACTERISTICS (continued)
Total regulation
(Line and load)
Main output
2.0%
5.0%
Surge
EN61000-4-5
EN61000-4-4
EN61000-4-3
EN61000-4-6
Level 3
Level 3
Level 3
Level 3
Auxiliary outputs
Fast transients
Radiated immunity
Conducted immunity
Rise time
At turn-on
1.0s, max.
Transient response
Main output
5.0% or 250mV
max. dev., 1ms max.
recovery to 1%
GENERAL SPECIFICATIONS
75% to 100%
step at 0.1A/µs
Hold-up time
Efficiency
120VAC, 60Hz
120VAC, 80W (-9605)
16.7ms @ 110W
Temperature coefficient
Overvoltage protection
Short circuit protection
0.02%/°C
125%, 10%
Continuous
See table
75% min.
Main outputs
Isolation voltage
Input/output
Input/chassis
4000VAC
1500VAC
Cyclic operation
Approvals and
standards
EN60601-1, IEC60601-1,VDE0750,
UL2601-1, C22.2 No. 601.1-M90
Minimum output current Single and multiple
INPUT SPECIFICATIONS
Weight
283g (10oz)
Input voltage range
(See Note 6)
Universal input
90 to 264VAC
47Hz to 63Hz
MTBF (@ 25°C)
MIL-HDBK-217F
220,000 hours min.
ENVIRONMENTAL SPECIFICATIONS (9)
Input frequency range
Thermal performance
Operating ambient,
(See derating curve)
Non-operating
50°C to 70°C, ambient,
convection cooled
0°C to 50°C, ambient,
convection cooled
0°C to 50°C ambient,
150LFM forced air
0°C to +50°C
Input surge current
(cold start)
120VAC
230VAC
18A max.
35A max.
-40°C to +85°C
Safety ground
leakage current
230VAC, 50Hz
<100µA
Derate to
50% load
80W
Input current
Input fuse
120VAC @ 80W
120VAC @ 110W
230VAC @ 80W
230VAC @ 110W
0.9A rms
1.3A rms
0.48A rms
0.7A rms
110W
Peak (0°C to +50°C, 60s) (See Note 3)
UL/IEC127
F3.15A H, 250VAC
Relative humidity
Altitude
Non-condensing
5% to 95% RH
EMC CHARACTERISTICS (12)
Operating
Non-operating
10,000 feet max.
30,000 feet max.
Conducted emissions
EN55022, FCC part 15
EN55022, FCC part 15
EN61000-3-2
Level A
Level A
Compliant
Radiated emissions
Harmonic current
emission correction
ESD air
Vibration (See Note 8)
Shock
5Hz to 500Hz
2.4G rms peak
516.4 Part IV
per MIL-STD-810E
EN61000-4-2
EN61000-4-2
Level 3
Level 3
ESD contact
File Name: NLP110M.PDF Rev: 13 Dec 2002