EXQ125 Series
S i n g l e o u t p u t
DC/DC CONVERTERS
36-100 W High Efficiency DC/DC Converters
2
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
OUTPUT
POWER
(MAX.)
OUTPUT
OUTPUT
REGULATION
INPUT
OUTPUT
VOLTAGE
EFFICIENCY
(TYP.)
MODEL
OVP
CURRENT CURRENT
VOLTAGE
NUMBER (8,9)
LINE
LOAD
(MIN.)
0 A
(MAX.)
30 A
30 A
30 A
30 A
25 A
20 A
8.3 A
36 W
45 W
33-75 Vdc
33-75 Vdc
33-75 Vdc
33-75 Vdc
33-75 Vdc
33-75 Vdc
33-75 Vdc
1.45 Vdc
1.8 Vdc
2.3 Vdc
3 Vdc
1.2 V
1.5 V
1.8 V
2.5 V
3.3 V
5 V
86.5%
87.5%
88.0%
90.0%
91.0%
92.0%
93.0%
0.1%
0.1%
0.1%
0.1%
0.1%
0.1%
0.1%
0.2%
0.2%
0.2%
0.2%
0.2%
0.2%
0.2%
EXQ125-48S1V2J
EXQ125-48S1V5J
EXQ125-48S1V8J
EXQ125-48S2V5J
EXQ125-48S3V3J
EXQ125-48S05J
EXQ125-48S12J
0 A
54 W
0 A
75 W
0 A
82.5 W
100 W
100 W
3.9 Vdc
6 Vdc
0 A
0 A
14.4 Vdc
12 V
0 A
Part Number System with Options
E X Q 1 2 5 - 4 8 S 1 V 2 - Z R N J
RoHS Compliance (8)
J = Pb-free (RoHS 6/6 compliant)
EX = Open Frame, Through Hole
Q = 1/4 Brick
Pin Length of Standard Product
Blank = 0.200” (5.08 mm)
Pin Length of Modified Standard Product
N = 0.145” (3.68 mm)
Output Wattage Class
125 = 125 Watts
K = 0.110” (2.79 mm)
(See Note 7)
Input Voltage
48 = 48 Volts (33 V to 75 V range)
Control Logic
Blank = Positive
R = Negative
Number of Outputs
S = Single
Blank = Standard Product
Z = Zero Undershoot,
Output Voltage
Soft Turn-off Characteristic
(Applies to 1.5 V, 1.8 V,
1V2 = 1.2 V, 1V5 = 1.5 V etc
2.5 V and 3.3 V models only)
Notes
PROTECTION
1
di/dt = 0.1 A/µs, Vin = 48 Vdc, Tc = 25 °C, load change = 0.5 lo max. to
0.75 lo max. and 0.75 lo max. to 0.5 lo max. Deviation varies by model, see
Longform Datasheet.
The EXQ125 meets level A and level B conducted emissions only with
external components connected before the input pins to the converter.
See Application Note 118.
Short circuit
Overvoltage
Continuous
Non-latching clamp
2
TELECOM SPECIFICATION
3
4
Recommended input fusing is a 5 A HRC 200 V rated fuse.
This product is only for inclusion by professional installers within other
equipment and must not be operated as a stand alone product.
Measured with no external Pi filter. Significant reduction possible with
external filter. See Application Note 118.
Central office interface A
ETS300-132-2, input voltage
and current requirements
5
6
7
8
Start-up into resistive load.
Contact the factory for Modified Standard pin length products.
TSE RoHS 5/6 (non Pb-free) compliant versions may be available on
special request, please contact your local sales representative for details.
NOTICE: Some models do not support all options. Please contact your
local Artesyn representative or use the on-line model number search tool
at http://www.artesyn.com/powergroup/products.htm to find a suitable
alternative.
CAUTION: Hazardous internal voltages and high temperatures.
Ensure that unit is not user accessible.
9
File Name: exq125s.pdf Rev (02): 17 Nov 2005
ARTESYN [ ARTESYN TECHNOLOGIES ]
