Technical Reference Note
Rev.02.06.15_#1.2
AVO75B-36S3V3
Page 22
Input Ripple & Inrush Current and Output Ripple & Noise Test Configuration
Figure 26 Input ripple & inrush current output ripple & noise test configuration
Vdc: DC power supply
L1: 12uH
Cin: 220uF/100V typical
C1 ~ C4: see Figure 21
Note - Using a coaxial cable with series 50ohm resistor and 0.68uF ceramic capacitor or a ground ring of probe to test
output ripple & noise is recommended
Artesyn Embedded Technologies