Technical Reference Note
Rev.07.04.14_#1.0
AVO100-36S3V3B-6L
Page 17
Application Notes
Typical Application
Below is the typical application of the AVO100-36S3V3B-6L power supply.
AVO100
EMI filter
Fuse
In+
Out+
Vin+
Vo +
S+
Vdc
C1
C2
C3
C4
Remote
Load
Trim
ON/ OFF
S-
Out-
In-
Vin-
Vo-
Figure 18 Typical application
C1: 100μF/100V electrolytic capacitor, P/N: UPM2A101MPD (Nichicon) or equivalent caps
C2, C3: 1μF/100V X7R ceramic capacitor, P/N: C3225X7R2A105KT0L0U (TDK) or equivalent caps
C4: 470μF/25V electrolytic capacitor, P/N: UPM1E471MED (Nichicon) or equivalent caps
Note: If ambient temperature is below -5°C, additional 220μF tantalum capacitor (Low ESR, ESR≤100mΩ) is needed for
output.
Fuse: External fast blow fuse with a rating of 10A/250Vac. The recommended fuse model is 0314010.MXP from Littlefuse
Far East Pte LTD.
Artesyn Embedded Technologies