P/N 36-651000-10 36-Pin
SSOP-to-0.6 DIP Adapter
GENERAL SPECIFICATIONS
• PCB: FR-4, 0.062 [1.56] or 0.094 [2.39] thick
• PADS: bare Cu protected with Entek® by Enthone or Omikron® white Sn to
eliminate co-planarity concerns and solder bridges
• MALE PINS: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M
• OPERATING TEMPERATURE: 221°F [105°C]
• MALE PIN PLATING: 200µ [5.08µ] Sn/Pb 93/7 per ASTM B579-73 over 100µ
[2.54µ] Ni per SAE-AMS-QQ-N-290
MOUNTING CONSIDERATIONS
• Standard thru-hole
CUSTOMIZATION:
In addition to the standard products shown
on this page, Aries specializes in custom design and production.
Special materials, platings, sizes, and configurations can be
furnished, depending on the quantity.
NOTE:
Aries reserves the
right to change product general specifications without notice.
ALL DIMENSIONS: INCHES [MILLIMETERS]
ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED
CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS
ORDERING INFORMATION
24-651000-10
24-651000-10-P
= Panelized Version
Bristol, PA 19007-6810 USA
TEL (215) 781-9956 • FAX (215) 781-9845
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
18065
Rev. AA
ARIES [ ARIES ELECTRONICS, INC. ]
