IM-275
SPECIFICATIONS
NOMINAL IMPEDANCE: 50 Ω
FREQUENCY RANGE: Model 151T: dc to 4 GHz
Model 150T: dc to 18 GHz
Model 152T: dc to 26.5 GHz
DRIVER INTERFACE:
Input Supply Voltage:
Control Signals:
+12.0 to +15.0V
TTL/CMOS compatible
parallel/ I2C serial
Interface Modes:
DC Characteristics (at 25 °C):
Digital Interface:
Parameter
Specification
-0.5 min, 0.8V max
High Level input: 2.0 min, 5.25V max
V
V
Low Level input:
IL
IH
I
Pullup Current
50 μA min, 400 μA max
PU
Power Supply:
V
Supply Voltage:
Supply current:
Supply Current:
+12.0 to +15.0V
25 mA
150 mA (per cell, switching)
IN
I
I
IN
CELL
POWER RATING:
1 watt average, 100 watts peak
(5 μsec pulse width; 0.5% duty cycle)
TEMPERATURE:
-20° to +70°C operating
-55° to +85°C nonoperating
TEMPERATURE COEFFICIENT: <0.0001 dB/dB/C
POWER SENSITIVITY:
RATED SWITCH LIFE:
<0.001 dB/dB/ Watt
5 million cycles per cell
RF INPUT CONNECTORS: Rugged female 3.5 mm which mate nondestructively with
SMA male connectors per MIL-STD-39012.
INTERFACE CONNECTOR: 14 pin .025 square post header on .1 center. Mates with Amp
connector 746285-2 or equivalent (one mating connector included with each unit).
SWITCHING SPEED: 20 msec (includes settling time)
CONTROL PULSE WIDTH: 20 msec (minimum)
REPEATABILITY**: +0.1 typical per cell
VIBRATION*:
ALTITUDE*:
SHOCK*:
MIL-STD-202F, Method 204D Cond B
MIL-STD-202F, Method 105C Cond B, 50,000 Ft.
MIL-STD -202F, Method 213B Cond B, except 10G, 6 msec
MIL-STD-202F, Method 103B, Cond. B (96 Hrs. @ 95%, RH).
HUMIDITY*:
6