High Current/High Voltage
Resin Sealed Filters
High current filters are ideal for use in high current
5 volt logic buss, but also can be used for ±48 VDC
telephone rack buss, high current switch mode power
supplies and DC charging systems. High voltage filters
find use in high voltage power supplies and applications
requiring U.L. Hi-Pot.
Installation Notes
for Figure 1 & 2 — see below (Figure 3 see page CF6)
Features
1. Mounting installation torque
I
Current ratings up to 100 Amps
Method A: Mounting in full threaded through-hole
Maximum torque: 96 in-lbs
I
Continuous voltage ratings up to
1250 VDC/240 VAC (400Hz)
Method B: Mounting w/hardware
Maximum torque: 84 in-lbs
I
U.L. 1459 recognized and CSA C22.2 approved
versions available
2. Terminal installation torque
Maximum torque: 20 in-lbs
Note: Use two-wrench method to install
terminal hardware
I
Rugged bolt-in style for easy installation
1-1/2 Imperfect Thds.
.060 Max., Typ.
5/16–24 Unf–2A Thd.
.250
(6.35)
ø .062 .005
(1.58 .13)
Typ.
.250
(6.35)
Min.
.250
(6.35)
.250
(6.35)
Min.
.500
(12.7)
Hex.
.250
(6.35)
Figure 3
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP25