Model A125N50X4
ROHS
Compliant
Chip Termination
125 Watts, 50Ω
Description
The A125N50X4 is high performance Aluminum Nirtride (AlN) chip
termination intended as an alternative to Beryllium Oxide (BeO). The
termination is well suited to all cellular frequency bands such as; AMPS,
GSM, DCS, PCS, PHS and UMTS. The high power handling makes the
part ideal for terminating circulators and for use in power combiners. The
termination is also RoHS compliant!
General Specifications
Resistive Element
Thick film
Features:
• RoHS Compliant
• 125 Watts
• DC – 4.0 GHz
• AlN Ceramic
Substrate
Terminal Finish
Operating Temperature
AlN Ceramic
Matte Tin over Nickel Barrier
-55 to +150°C (see de rating chart)
Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Resistance Value:
Power:
Frequency Range:
50 Ohms, ± 2%
125 Watts
• Non-Nichrome Resistive
Element
DC – 4.0 GHz
• Low VSWR
• 100% Tested
• Small Size
> 26 dB to 2.7 GHz
> 20 dB to 4.0 GHz
Return Loss
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change.
Outline Drawing
A125N50X4 (097) rev.D pg.1 of 2
USA/Canada:
Toll Free:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Available on Tape
and Reel For Pick and
Place Manufacturing.
Europe: