Model 2425B50-100J
Preliminary
Typical Performance: 2.35 GHz. to 2.55 GHz.
Mounting Configuration:
6X .012
[0.30]
4X .014
[0.35]
In order for Xinger surface mount components to work
optimally, there must be a 50Ω transmission line to the
balanced port and 100Ω transmission lines from the
unbalanced ports. If this condition is not satisfied, amplitude
balance, insertion loss and VSWR may not meet published
specifications.
6X .010
[0.25]
.033
[0.85]
6X .002
[0.05]
All of the Xinger components are constructed from ceramic
filled PTFE composites which possess excellent electrical
and mechanical stability having X and Y thermal coefficient
of expansion (CTE) of 17 ppm/oC
Plated thru
hole to
ground
3X Transmission
Line
Circuit Pattern
An example of the PCB footprint used in the testing of these
Footprint Pad (s)
parts is shown to the left.
in specific designs, the
Solder Resist
transmission line widths need to be adjusted to the unique
dielectric coefficients and thicknesses as well as varying
pick and place equipment tolerances.
Dimensions are in Inches [Millimeters]
Mounting Footprint
USA/Canada:
Toll Free:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Available on Tape
and Reel For Pick and
Place Manufacturing.
Europe:
ANAREN [ ANAREN MICROWAVE ]
