Model 0922B75-37A
Rev. A
Mounting Configuration:
75 Ω
6X .030
[0.76]
Transmission
Line
In order for Xinger surface mount components to work
optimally, there must be a 75Ω transmission line to the
balanced port and 37.5Ω transmission lines from the
unbalanced ports. If this condition is not satisfied, amplitude
balance, insertion loss and VSWR may not meet published
specifications.
6X .016
[0.41]
Plated thru
holes to
ground
.125
[3.17]
All of the Xinger components are constructed from ceramic
filled PTFE composites which possess excellent electrical
and mechanical stability having X and Y thermal coefficient
of expansion (CTE) of 17 ppm/oC
No copper
area
2X 37.5 Ω
Transmission
Line
4X .020
[0.51]
An example of the PCB footprint used in the testing of these
Circuit Pattern
parts is shown to the left.
In specific designs, the
Footprint Pad (s)
transmission line widths need to be adjusted to the unique
dielectric coefficients and thicknesses as well as varying
pick and place equipment tolerances.
Solder Resist
Dimensions are in Inches [Millimeters]
Mounting Footprint
Packaging and Ordering Information
Parts are available in reel and are packaged per EIA 481-2. Parts are oriented in tape and reel as shown below. Minimum order
quantities are 4000 per reel. See Model Numbers below for further ordering information.
Direction of
Part Feed
(Unloading)
Dimensions are in inches [mm]
USA/Canada:
Toll Free:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Available on Tape
and Reel For Pick and
Place Manufacturing.
Europe:
ANAREN [ ANAREN MICROWAVE ]
