PD070-HL2
Table 2: Absolute Maximum Ratings
PARAMETER
MIN
MAX
5
UNIT
mA
μA
V
Forward Current
Reverse Current
Reverse Voltage
Optical input power
-
-
-
-
250
30
5
mW
ºC
Operating Case Temperature
Storage Temperature
-40
-40
-
+85
+85
+250
ºC
Soldering temperature (10 seconds)
ºC
Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied
under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability.
PIN LOCATIONS – Standard
Dimensions: INCHES [mm]
ORDERING INFORMATION
Table 3: Standard
Part Number
PD070-HL2-300
PD070-HL2-520
Options
SC/APC pigtail, 1 meter SMF-28 fiber, 3 pin
SC/APC receptacle, 3 pin
Table 4: Custom
Part Number
Options
Number of pins: 2, 3
Fiber length: 0.5 meter, 1.0 meter
Fiber type: Single mode (SMF-28) or custom supplied
Connector Type: SC, ST or FC. APC or UPC
Number of pins: 2, 3
PD070-HL2-3xx
PD070-HL2-5xx
Connector Type: SC, ST or FC. Aligned for APC or UPC
Please contact Anadigics for the specific part number and pinout that suits your needs
IMPORTANT NOTICE
ANADIGICS, Inc. reserves the right to make changes to its products or discontinue any product at any
time without notice. The product specifications contained in Advanced Product Information sheets and
Preliminary Data sheets are subject to change prior to a product’s formal introduction. Information in
Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS
assumes no responsibility for inaccuracies. ANADIGICS strongly urges customers to verify that the
information they are using is current before placing orders.
ANADIGICS, Inc.
829 Flynn Road
Camarillo, California 93012, U.S.A.
Tel: +1 (805) 445-4500
Fax: +1 (805) 445-4502
URL: http://www.anadigics.com
E-mail: Mktg@anadigics.com
WARNING
ANADIGICS products are not intended for use in life support appliances, devices, or systems. Use of
an ANADIGICS product in any such application without written consent is prohibited.
Rev 1.0
2
ANADIGICS [ ANADIGICS, INC ]
