AWU6605
APPLICATION INFORMATION
To ensure proper performance, refer to all related
Application Notes on the ANADIGICS web site:
http://www.anadigics.com
Shutdown Mode
The power amplifier may be placed in a shutdown
mode by applying logic low levels (see Operating
Ranges table) to the V
ENABLE
and V
MODE1
voltages.
Bias Modes
The power amplifier may be placed in either a Low Bias
mode or a High Bias mode by applying the appropriate
logic level (see Operating Ranges table) to V
MODE1
.
The Bias Control table lists the recommended modes
of operation for various applications. V
MODE2
is not
necessary for this PA.
Two operating modes are available to optimize current
consumption. High Bias/High Power operating mode
is for P
OUT
levels > 16 dBm. At around 17 dBm output
power, the PA can be “Mode Switched” to Medium/
Low power mode for lowest quiescent current
consumption.
Table 5: Bias Control (UMTS)
APPLICATION
UMTS - med/low power
(Low Bias Mode)
UMTS - high power
(High Bias Mode)
Optional lower V
CC
in low
power mode
Shutdown
P
OUT
LEVELS
<
+17 dBm
> +16 dBm
<
+7 dBm
-
BIAS MODE
Low
High
Low
Shutdown
V
ENABLE
+2.4 V
+2.4 V
+2.4 V
0V
V
MODE1
+2.4 V
0V
+2.4 V
0V
V
CC
3.2 - 4.2 V
3.2 - 4.2 V
1.5 V
3.2 - 4.2 V
V
BATT
> 3.2 V
> 3.2 V
> 3.2 V
> 3.2 V
PRELIMINARY DATA SHEET - Rev 1.1
08/2009
5