AWT6132R
APPLICATION INFORMATION
To ensure proper performance, refer to all related High Bias Mode
Application Notes on the ANADIGICS web site: The power amplifier may be placed in a high bias mode
http://www.anadigics.com
by applying a logic low level (see Operating Ranges
table) to the VMODE voltage.
Shutdown Mode
The power amplifier may be placed in a shutdown
mode by applying logic low levels (see Operating
Ranges table) to both the VREF and VMODE voltages.
GND at slug (pad)
VCC
GND
1
7
4.7uF
(ceramic)
RF Input
(50 Ohms)
2
RF Out
(50 Ohms)
6
Bias Control
VCC
VREF
3
4
5
0.1uF
4.7uF (ceramic)
VMODE
Figure 3: Application Circuit Schematic
MASTER DATA SHEET - Rev 2.1
5
10/2008
ANADIGICS [ ANADIGICS, INC ]
