ACA1205
ELECTRICAL CHARACTERISTICS
Table 2: Absolute Minimum and Maximum Ratings
PARAMETER
MIN
MAX
+15
UNIT
VDC
dBmV
°C
Amplifier Supplies (pins 10, 11, 14, 15)
RF Input Power (pins 3, 6)
Storage Temperature
0
-
-65
-
+70
+150
+260
5.0
Soldering Temperature
Soldering Time
°C
-
sec
Stresses in excess of the absolute ratings may cause permanent
damage. Functional operation is not implied under these conditions.
Exposure to absolute ratings for extended periods of time may
adversely affect reliability.
Notes:
1. Pins 3 and 6 should be AC-coupled. No external DC bias should be
applied.
2. Pin 7 should be pulled to ground through resistor R1, as shown in Figure 3.
No external DC bias should be applied.
Table 3: Operating Ranges
PARAMETER
MIN
40
-
TYP
MAX
870
-
UNIT
MHz
VDC
OC
RF Frequency
-
+12
-
Supply: VDD (pins 10, 11, 14, 15)
Operating Temperature
-40
+110
The device may be operated safely over these conditions; however,
parametric performance is guaranteed only over the conditions defined in
the electrical specifications.
Data Sheet - Rev 2.0
08/2001
3