欢迎访问ic37.com |
会员登录 免费注册
发布采购

ATS477A-SLA-A 参数 Datasheet PDF下载

ATS477A-SLA-A图片预览
型号: ATS477A-SLA-A
PDF下载: 下载PDF文件 查看货源
内容描述: 单相哈尔效应锁存 [Single Phase Hal Efect Latch]
分类和应用:
文件页数/大小: 7 页 / 197 K
品牌: ANACHIP [ ANACHIP CORP ]
 浏览型号ATS477A-SLA-A的Datasheet PDF文件第2页浏览型号ATS477A-SLA-A的Datasheet PDF文件第3页浏览型号ATS477A-SLA-A的Datasheet PDF文件第4页浏览型号ATS477A-SLA-A的Datasheet PDF文件第5页浏览型号ATS477A-SLA-A的Datasheet PDF文件第6页浏览型号ATS477A-SLA-A的Datasheet PDF文件第7页  
ATC
Single Phase Hall Effect Latch
Features
- On-chip Hall sensor
- Bi-direction H type output drivers for single coil
- Internal bandgap regulator allows temperature
compensated operations and a wide operating
voltage range
- High output sinking capability up to 250mA
- Operating voltage: 3.5V~20V
- Low output switching current noise
- Build-in shunt Zener protection for output driver
- SOP-7L provide FG output pin
- Package: SIP-4L and SOP-7L
ATS477
General Description
ATS477 that integrates Hall sensor with output
drivers is designed for electrical commutation of
brush-less DC motor application. The device
includes on-chip Hall voltage generator for
magnetic sensing, the error amplifier that amplifies
the Hall voltage, a comparator that is to provide
switching hysteresis for noise rejection, the
bi-direction drivers for sinking and driving large
current load, and the frequency generator (FG) that
provides a signal proportional to rotation speed.
Internal bandgap regulator is used to provide
temperature compensated bias for internal circuits
and allows a wide operating supply voltage range.
Built-in protection circuit and output shunt Zener
diodes were applied for protecting output drivers
during operating.
If a magnetic flux density is larger than threshold
Bop, DO is turned to sink and DOB is turned to
drive. The output state is held until a magnetic flux
density reversal falls below Brp causing DO to be
turned to drive and DOB turned to sink.
ATS477 is rated for operation over-temperature
range from -20
o
C to 85
o
C and voltage range from
3.5V to 20V. The devices are available in low cost
die forms or rugged SIP-4L and power SOP-7L
packages.
Applications
- Single-coil Brush-less DC Fan
- Single-coil Brush-less DC Motor
Ordering Information
ATS477 X - X X X - X
Wafer Body
Blank or
A~Z : if necessary
to specify
Package
P: SIP-4L
S: SOP-7L
Lead
L : Lead Free
Blank: Normal
Packing
Blank : Tube or Bulk
A : Tape & Reel
Magnetic
Characteristics
A or B
Application Circuit
FG
1
2
3
4
1
2
7
6
coil
coil
3
Vcc
4
5
Vcc
(SIP-4L)
Single-coil brush-less DC Fan
(SOP 7)
This datasheet contains new product information. Anachip Corp. reserves the rights to modify the product specification without notice. No liability is assumed as a result of the use of
this product. No rights under any patent accompany the sale of the product.
Rev. A5 Apr 15, 2004
1/7