AS1526/AS1527
Data Sheet
- P i n o u t
and Packaging
4 Pinout and Packaging
Pin Assignments
Figure 2. Pin Assignments (Top View)
V
DD
1
8 SCLK
AIN 2
7 CSN
AS1526/
AS1527
SHDNN 3
6 DOUT
REF 4
5 GND
Pin Descriptions
Table 1. Pin Descriptions
Pin Number
1
2
Pin Name
V
DD
AIN
Description
Positive Supply Voltage.
+2.7 to +3.6V
Sampling Analog Input.
0V to V
REF
range.
Three-Level Shutdown Input.
Pulling this pin low puts the AS1526/AS1527
in shutdown mode, down to 4µA (max) supply current. The devices are fully
operational with this pin high or floating.
Note:
For the AS1526, pulling this pin high enables the internal reference; let-
ting this pin float disables the internal reference allowing for the use of an
external reference. See also pin 4.
A/D Conversion Reference Voltage.
This pin serves as the internal 2.5V
reference output for the AS1526; bypass this pin with a 4.7µF capacitor.
This pin also serves as the external reference voltage input for the AS1527, or
for AS1526 if the internal reference is disabled. Bypass this pin with a
minimum of 0.1µF when using an external reference. See also pin 3.
Analog and Digital Ground
Serial Data Output.
Data changes state at SCLK’s falling edge.
Note:
This pin is high-impedance when pin CSN is high.
Active-Low Chip Select.
The falling edge of this pin initiates a conversion.
Note:
When this pin is high, DOUT is high-impedance.
Serial Clock Input.
This pin clocks data out at rates up to 2.1MHz.
3
SHDNN
4
REF
5
6
7
8
GND
DOUT
CSN
SCLK
www.austriamicrosystems.com
Revision 1.03
3 - 21
AMSCO [ AUSTRIAMICROSYSTEMS AG ]
