AS1376
Datasheet - Application Information
Total Thermal Path Resistance:
RJA = RJC + RCS + RSA
(EQ 6)
(EQ 7)
Junction Temperature (TJºC) is determined by:
TJ = PDMAX RJA + TAMB ºC
9.6 Explanation of Steady State Specifications
9.6.1 Line Regulation
Line regulation is defined as the change in output voltage when the input (or line) voltage is changed by a known quantity. It is a measure of the
regulator’s ability to maintain a constant output voltage when the input voltage changes. Line regulation is a measure of the DC open loop gain
of the error amplifier. More generally:
VOUT
VIN
----------------
Line Regulation =
and is a pure number
(EQ 8)
In practise, line regulation is referred to the regulator output voltage in terms of % / VOUT. This is particularly useful when the same regulator is
available with numerous output voltage trim options.
VOUT
---------------- ------------
100
VIN VOUT
Line Regulation =
% / V
(EQ 9)
9.6.2 Load Regulation
Load regulation is defined as the change of the output voltage when the load current is changed by a known quantity. It is a measure of the
regulator’s ability to maintain a constant output voltage when the load changes. Load regulation is a measure of the DC closed loop output
resistance of the regulator. More generally:
VOUT
IOUT
----------------
Load Regulation =
and is units of ohms ()
(EQ 10)
In practise, load regulation is referred to the regulator output voltage in terms of % / mA. This is particularly useful when the same regulator is
available with numerous output voltage trim options.
VOUT
---------------- ----------------
100
Load Regulation =
% / mA
(EQ 11)
IOUT VOUT
9.6.3 Setting Accuracy
Accuracy of the final output voltage is determined by the accuracy of the ratio of R1 and R2, the reference accuracy and the input offset voltage
of the error amplifier. When the regulator is supplied pre-trimmed, the output voltage accuracy is fully defined in the output voltage specification.
When the regulator has a SET terminal, the output voltage may be adjusted externally. In this case, the tolerance of the external resistor network
must be incorporated into the final accuracy calculation. Generally:
R1R1
R2R2
---------------------
VOUT = VSETVSET 1 +
(EQ 12)
The reference tolerance is given both at 25ºC and over the full operating temperature range.
9.6.4 Total Accuracy
Away from dropout, total steady state accuracy is the sum of setting accuracy, load regulation and line regulation. Generally:
Total % Accuracy = Setting % Accuracy + Load Regulation % + Line Regulation %
(EQ 13)
www.austriamicrosystems.com/LODs/AS1376
Revision 1.4
13 - 19
AMSCO [ AMS(艾迈斯) ]
