AS1360
Datasheet - Pinout and Packaging
4 Pinout and Packaging
Pin Assignments
Figure 2. Pin Assignments (Top View)
GND
1
2
3
VIN
AS1360
VOUT
3-pin SOT23
Pin Descriptions
Table 1. Pin Descriptions
Pin Number
Pin Name
Description
Ground. This pin should be connected to the negative side of the output and
the negative terminal of the input capacitor. No high-current flows out of this
pin, only bias current (1.5µA, typ).
1
GND
Note: Voltage drops between this pin and the negative side of the load
should be minimized.
Regulated Output Voltage. This pin should be connected to the positive
side of the load and the positive terminal of the output capacitor. Current
flowing out of this pin is equivalent DC load current.
2
3
VOUT
VIN
Note: The positive side of the output capacitor should be mounted as close
as is practical to this pin.
Unregulated Input Voltage. This pin should be connected to the positive
terminal of the input capacitor.
Note: The input capacitor should be mounted as close as is practical to this
pin.
www.austriamicrosystems.com/AS1360
Revision 1.04
2 - 12
AMSCO [ AMS(艾迈斯) ]
