AS1330
Datasheet - Package Drawings and Markings
10 Package Drawings and Markings
The device is available in a TDFN (2x2mm) 8-pin package.
Figure 24. TDFN (2x2mm) 8-pin package Diagram
Table 5. TDFN (2x2mm) 8-pin package Dimensions
Symbol
A
Min
0.51
0.00
Typ
0.55
0.02
0.15 ref
0.15
0.10
Max
0.60
0.05
Symbol
Min
Typ
2.00
2.00
1.60
0.90
0.325
8
Max
D
E
D2
E2
L
N
ND
NE
A1
A3
aaa
bbb
ccc
k
1.45
0.75
1.70
1.00
0.425
0.225
0.10
0.20
0.20
4
--
b
e
0.25
0.50
0.30
Note:
3. Dimensioning and tolerancing conform to ASME Y14.5M-1994.
4. All dimensions are in millimeters, angle is in degrees.
5. Terminal #1 identifier and terminal numbering convention shall conform to JESD 95-1 SPP-012. Details of ter-
minal #1 identifier are optional, but must be located within the area indicated. The terminal #1 identifier may be
either a mold, embedded metal or mark feature.
6. Dimension b applies to metallized terminal and is measured between 0.15 and 0.30mm from terminal tip.
www.austriamicrosystems.com/DC-DC_Step-Up/AS1330
Revision 1.04
14 - 16
AMSCO [ AMS(艾迈斯) ]
