Type N
Type N Specifications
Electrical
Impedance
50 Ω
Frequency range
DC - 11 GHz (flexible cable)
DC - 18 GHz (semi-rigid)
VSWR
1.3 max. @ DC - 11 GHz (straight)
1.35 max. @ DC - 11 GHz (right-angle)
90 dB minimum @ 3 GHz
≤ 1,500 V peak (depending on cable)
center contact: ≤ 1 mΩ
RF-leakage
Voltage rating (at sea level)
Contact resistance
outer contact: ≤ 0.2 mΩ
Insulation resistance
5,000 MΩ minimum
Insertion loss maximum
Dielectric withstanding voltage
≤ 0.15 dB @ 10 GHz
2,500 Vrms (at sea level)
Mechanical
Mating
5/8-24 Threaded coupling (MIL-STD-348)
15 inch lbs to max recommended
101.2 lbs (450N) min.
positive stop, 18/20 lb-ft (25/30 N-m)
All braid hex crimps, clamps: screw-thread and braid clamp
Solder
Coupling torque, min./max.
Coupling nut retention force
Assembly torque (body/clamp nut)
Braid/Jacket cable affixment
Center conductor cable affixment
Captivated contacts
All crimp, unless noted otherwise
6.3 lbs (28N) min.
Contact Captivation
Durability (matings)
500 cycles minimum
Environmental
Temperature range
- copolymer of styrene:
Weatherproof
-65°C to +165°C
-55°C to +85°C
All series N with gaskets
Hermetic seals
Thermal shock
Moisture resistance
Corrosion
Vibration
Mechanical shock
Helium leak test, 2 x 10^8 cc/sec.
MIL-STD-202, method 107, cond. B
MIL-STD-202, method 106
MIL-STD-202, method 101, cond. B
MIL-STD-202, method 204, cond. B
MIL-STD-202, method 213, cond. 1
Note: These characteristics are typical but may not apply to all connectors.
145
Amphenol® RF: 800-627-7100
Type N