A25LQ080 Series
8Mbit, 3V Suspend/Resume, Dual/Quad-I/O Serial Flash Memory
with 100MHz Uniform 4KB Sectors
FEATURES
Family of Serial Flash Memories
Deep Power-down Mode 15µA (Max.)
Advanced Protection Features
- Software and Hardware Write-Protect
- Top/Bottom, 4KB Complement Array Protection
Additional 64-byte user-lockable, one-time programmable
(OTP) area
- A25LQ080: 8M-bit /2M-byte
Flexible Sector Architecture with 4KB sectors
- Sector Erase (4K-bytes) in 70ms (typical)
- Block Erase (64K-bytes) in 0.5s (typical)
- Program/Erase Suspend & Resume
Page Program (up to 256 Bytes) in 1.5ms (typical)
2.7 to 3.6V Single Supply Voltage
8Mbit Flash memory
- Uniform 4-Kbyte Sectors
Dual input / output instructions resulting in an equivalent
clock frequency of 200MHz:
- Uniform 64-Kbyte Blocks
Electronic Signatures
- FAST_READ_DUAL_OUTPUT Instruction
- FAST_READ_DUAL_INPUT_OUTPUT Instruction
- Dual Input Fast Program (DIFP) Instruction
Quad input / output instructions resulting in an equivalent
clock frequency of 400MHz:
- JEDEC Standard Two-Byte Signature
A25LQ080: (4014h)
- RES Instruction, One-Byte, Signature, for backward
compatibility
A25LQ080: (13h)
- FAST_READ_QUAD_ OUTPUT Instruction
- FAST_READ_QUAD_INPUT_OUTPUT Instruction
- Quad Input Fast Program (QIFP) Instruction
SPI Bus Compatible Serial Interface
100MHz Clock Rate (maximum)
Package options
- 8-pin SOP (150/209mil), 8-pin DIP (300mil) or 8-pin WSON
(6*5mm)
- All Pb-free (Lead-free) products are RoHS compliant
GENERAL DESCRIPTION
The A25LQ080 is 8M bit Serial Flash Memory, with advanced
write protection mechanisms, accessed by a high speed
SPI-compatible bus.
sectors. Each sector is composed of 16 pages. Each page is
256 bytes wide. Thus, the whole memory can be viewed as
consisting of 4,096 pages, or 1,048,576 bytes.
The whole memory can be erased using the Chip Erase
instruction, a block at a time, using Block Erase instruction, or a
sector at a time, using the Sector Erase instruction.
The memory can be programmed 1 to 256 bytes at a time,
using the Page Program instruction.
The memory is organized as 16 blocks, each containing 16
Pin Configurations
SOP8 Connections
DIP8 Connections
WSON8 Connections
A25LQ080
VCC
A25LQ080
A25LQ080
VCC
1
8
VCC
S
S
1
2
3
4
8
7
6
5
1
2
3
4
8
7
6
5
S
DO (IO1)
DO (IO1)
DO (IO1)
HOLD (IO3)
C
DI (IO0)
HOLD (IO3)
C
DI (IO0)
2
3
4
7
6
5
HOLD (IO3)
C
DI (IO0)
W (IO2)
W (IO2)
W (IO2)
VSS
VSS
VSS
(April, 2016, Version 1.0)
1
AMIC Technology Corp.