AMIS-710225: 200dpi CIS Module
5.0 Electro-Optical Characteristics (25
°
C)
Table 4: Electro-Optical Characteristics (25 C)
Parameter
Number of photo detectors
Pixel-to-pixel spacing
Line scanning rate
Clock frequency
(3)
Bright output voltage
Bright output non-uniformity
(5)
Adjacent pixel non-uniformity
(6)
Dark non-uniformity
Dark output voltage
(7)
Modulation transfer function
Definitions:
1.
2.
3.
4.
5.
6.
(4)
(2)
°
Data Sheet
Symbol
(1)
Tint
Parameter
832
125
180
5
1.0
<+/-30
<25
<20
<200
>50
Units
Elements
µm
µsec
MHz
V
%
%
mV
mV
%
Note
Tested @ 5MHz
clock frequency
Test at Tint =
180us
f
Video output
Up
Uadj
Ud
Vd
MTF
See Note 7 for
MTF & DOF
7.
8.
9.
Tint: Line scanning rate or integration time int is determined by the interval of two start pulses (SP). The module was test at 180us, but it will operate to 167us with
clocking speed of 5.0MHz.
f: main clock frequency he module was tested at 5.0MHz, but electrically it reliably operates above 5.0MHz, but with a minimum integration time of 167µsec.
Vpavg =
∑
Vp(n)/832
Up = [(Vpmax - Vp) / Vp] x 100% or [(Vp - Vpmin) / Vp] x 100%
Upadj = MAX[ | (Vp(n) - Vp(n+l) | / Vp(n)] x 100%
Upadj is the non-uniformity percentage pixel to pixel
Ud = Vdmax – Vdmin
Vdmin is the minimum output on a black document (O.D.=0.8)
Vdmax: maximum output voltage of black document (O.D.= 0.8)
MTF = [(Vmax - Vmin) / (Vmax + Vmin)] x 100 [%]. DOF range is defined with the MTF
MTF is measured at glass surface and at 0.4mm from the glass > 50 percent and peaks at approximately mid-point of 0.2mm.
Vmax: maximum output voltage at 50 lp/inch (At 1/2 of the optical Nyquest Frequency)
Vmin: minimum output voltage at 50lp/inch
O.D. = optical density
lp / inch: line pair per inch
Table 5: Recommended Operating Conditions (25°C)
Item
Symbol
Power supply
Vdd
Vn.
VLED
Idd
In
ILED
Input voltage at digital high
Vih
Input voltage at digital low
Vil
Clock frequency
f
Clock pulse high duty cycle
Clock pulse high duration
(3)
Integration time
Tint
Operating temperature
Top
Notes:
1.
2.
3.
Min.
4.5
-4.5
Vdd-1.0
0
25
50
0.167
Mean
5.0
-5
5
30
6
300
Vdd-.5
(1)
Max.
5.5
-12
5.5
40
15
450
Vdd
0.6
(2)
5.0
25
5.0
50
Units
V
V
V
ma
ma
ma
V
V
MHz
%
ns
ms
°
C
Tested at 5.0MHz and 180us
Also used as test frequency
Tint (Min) is the lowest line integration time available at 5.0MHz clock rate
AMI Semiconductor
– May 06, M-20561-001
www.amis.com
4