欢迎访问ic37.com |
会员登录 免费注册
发布采购

AMIS-710207 参数 Datasheet PDF下载

AMIS-710207图片预览
型号: AMIS-710207
PDF下载: 下载PDF文件 查看货源
内容描述: 200DPI CIS模块 [200dpi CIS Module]
分类和应用:
文件页数/大小: 7 页 / 306 K
品牌: AMI [ AMI SEMICONDUCTOR ]
 浏览型号AMIS-710207的Datasheet PDF文件第2页浏览型号AMIS-710207的Datasheet PDF文件第3页浏览型号AMIS-710207的Datasheet PDF文件第4页浏览型号AMIS-710207的Datasheet PDF文件第5页浏览型号AMIS-710207的Datasheet PDF文件第6页浏览型号AMIS-710207的Datasheet PDF文件第7页  
AMIS-710207-A4: 200dpi CIS Module
Data Sheet
1.0 General Description
The AMIS-710207-A4 (PI207MC-A4) contact image sensor (CIS) module uses MOS image sensor technology for high-speed
performance and high sensitivity. The AMIS-710207-A4 is suitable for scanning A4 size (216mm) documents with 8 dots per millimeter
(dpm) resolution. Applications include fax machines, game systems, a variety of mark readers, and other automation equipment
requiring document scanners.
2.0 Key Features
Light source, lens and sensor are integrated into a single module
8dpm resolution, 216mm scanning length
Dual LED light source, IR and Red, with a line scan time to 347µsec @ 5MHz
Wide dynamic range
Analog output
Compact size
14.5mm x 19.5mm x 232mm
Low power
Light weight
3.0 Functional Description
The AMIS-710207-A4 imaging array consists of 27 AMIS-720233 (PI3033B) sensors, produced by AMIS, that are cascaded to provide
1728 photo-detectors with their associated multiplex switches and a digital shift register that controls its sequential readout. Mounted in
the module is a one-to-one graded indexed micro lens array that focuses on the image of the scanned documents, then transfers it onto
the sensors. The on-board amplifier processes the video signal to produce a sequential stream of video at the output pin of the
AMIS-710207-A4 module.
Illumination is accomplished by means of integrated LED sources; Red (660nm) and IR (880nm). All components are housed in a small
plastic housing, which has a cover glass that acts as the focal point for the object being scanned. In addition, it protects the imaging
array, micro lens assembly and LED light source from dust. Inputs and outputs (I/O) to and from the module are by a 10-pin connector,
JAE 1L-Z-10P-S125L3-E, located on one end of the module. For the Pin 1 location, see Figure 4, overall view of the module house. A
cross section of the AMIS-710207-A4 module is shown in Figure 1 and a block diagram in Figure 2.
AMI Semiconductor
– May 06, M-20494-001
www.amis.com
1