Revision 1.02 – June 27, 2006
S5935 – PCI Product
Data Book
This register is hardwired to 0. The cache line configu-
ration register is used by the system to define the
cache line size in doubleword (64-bit) increments. This
controller does not use the “Memory Write and Invali-
date” PCI bus cycle commands when operating in the
bus master mode, and therefore does not internally
require this register. When operating in the target
mode, this controller does not have the connections
necessary to “snoop” the PCI bus and accordingly
cannot employ this register in the detection of burst
transfers that cross a line boundary.
CACHE LINE SIZE REGISTER (CALN)
Cache Line Size
0Ch
Register Name
Address Offset
Power-up value
Boot-load
00h, hardwired
not used
Read Only
8 bits
Attribute
Size
Figure 14. Cache Line Size Register
7
0
00h
Cache Line Size (RO)
AMCC Confidential and Proprietary
DS1527
45