Chapter 5: DC and Switching Characteristics
5–25
Document Revision History
Document Revision History
Table 5–32 shows the revision history for this chapter.
Table 5–32. Document Revision History (Part 1 of 2)
Date and Revision Changes Made
Summary of Changes
November 2008,
version 2.4
■ Updated Table 5–2.
—
■ Updated “Internal Timing Parameters” section.
■ Updated New Document Format.
■ Updated Figure 5–1.
October 2008,
version 2.3
—
July 2008,
version 2.2
■ Updated Table 5–14 , Table 5–23 , and Table 5–24.
—
—
March 2008,
version 2.1
■ Added (Note 5) to Table 5–4.
December 2007,
version 2.0
■ Updated (Note 3) and (4) to Table 5–1.
■ Updated Table 5–2 and added (Note 5).
Updated document with
MAX IIZ information.
■ Updated ICCSTANDBY and ICCPOWERUP information and added
IPULLUP information in Table 5–4.
■ Added (Note 1) to Table 5–10.
■ Updated Figure 5–2.
■ Added (Note 1) to Table 5–13.
■ Updated Table 5–13 through Table 5–24, and Table 5–27 through
Table 5–30.
■ Added tCOMB information to Table 5–15.
■ Updated Figure 5–6.
■ Added “Referenced Documents” section.
■ Added note to Table 5–1.
December 2006,
version 1.8
—
■ Added document revision history.
■ Minor content and table updates.
July 2006,
version 1.7
—
—
February 2006,
version 1.6
■ Updated “External Timing I/O Delay Adders” section.
■ Updated Table 5–29.
■ Updated Table 5–30.
November 2005,
version 1.5
■ Updated Tables 5-2, 5-4, and 5-12.
—
—
August 2005,
version 1.4
■ Updated Figure 5-1.
■ Updated Tables 5-13, 5-16, and 5-26.
■ Removed Note 1 from Table 5-12.
■ Updated the RPULLUP parameter in Table 5-4.
■ Added Note 2 to Tables 5-8 and 5-9.
■ Updated Table 5-13.
June 2005,
version 1.3
—
■ Added “Output Drive Characteristics” section.
2
■ Added I C mode and Notes 5 and 6 to Table 5-14.
■ Updated timing values to Tables 5-14 through 5-33.
© Novermber 2008 Altera Corporation
MAX II Device Handbook
ALTERA [ ALTERA CORPORATION ]
