9–40
Chapter 9: Using User Flash Memory in MAX II Devices
Creating Memory Content File
shows page 3 of the altufm MegaWizard Plug-In Manager, selecting
none
for the interface protocol. By selecting
none,
all the other options are grayed out or
unavailable to you. However, you still can specify the initial content of the UFM block
on page 4 of the altufm MegaWizard Plug-In Manager as discussed in
Figure 9–44.
Page 3 altufm MegaWizard Plug-In Manager (None)
Creating Memory Content File
You can initialize the content of the UFM through a memory content file. Quartus II
software supports two types of initial memory content file format: Memory
Initialization File (.mif) and Hexadecimal File (.hex). A new memory content file for
the UFM block can be created by clicking
New
on the File menu. Select the HEX file or
MIF in the
Other Files
tab (Figure
ALTERA [ ALTERA CORPORATION ]
