Chapter 9: Configuration, Design Security, and Remote System Upgrades in the Cyclone III Device Family
9–87
Document Revision History
Document Revision History
Table 9–32 lists the revision history for this document.
Table 9–32. Document Revision History
Date
Version
Changes
■ Updated “Configuration Features” on page 9–2, “Reset” on page 9–8,“AS Configuration
(Serial Configuration Devices)” on page 9–12, “Single-Device AS Configuration” on
page 9–13, “AP Configuration Supported Flash Memory” on page 9–24, “Single-Device
AP Configuration” on page 9–25, “JTAG Configuration” on page 9–48, and “User
Watchdog Timer” on page 9–85.
■ Removed the “Overriding the Internal Oscillator” section from “JTAG Configuration”.
December 2011
2.0
■ Updated Figure 9–11, Figure 9–24, Figure 9–25, Figure 9–26, Figure 9–27, Figure 9–29,
Figure 9–30.
■ Updated Table 9–13, Table 9–18, and Table 9–22.
■ Replaced links to AN 386: Using the Parallel Flash Loaderwith the Quartus II Software
links to Parallel Flash Loader Megafunction User Guide.
■ Updated Table 9–7, Table 9–10, Table 9–22, and Table 9–28.
■ Updated Figure 9–23 and Figure 9–30.
December 2009
1.2
■ Updated the “Programming Serial Configuration Devices” and “Security Against
Tampering” sections.
■ Minor changes to the text.
Made a minor correction to the part number.
Initial release.
July 2009
June 2009
1.1
1.0
December 2011 Altera Corporation
Cyclone III Device Handbook
Volume 1
ALTERA [ ALTERA CORPORATION ]
