欢迎访问ic37.com |
会员登录 免费注册
发布采购

5M1270ZT64I4N 参数 Datasheet PDF下载

5M1270ZT64I4N图片预览
型号: 5M1270ZT64I4N
PDF下载: 下载PDF文件 查看货源
内容描述: MAX V器件手册 [MAX V Device Handbook]
分类和应用:
文件页数/大小: 166 页 / 4016 K
品牌: ALTERA [ ALTERA CORPORATION ]
 浏览型号5M1270ZT64I4N的Datasheet PDF文件第5页浏览型号5M1270ZT64I4N的Datasheet PDF文件第6页浏览型号5M1270ZT64I4N的Datasheet PDF文件第7页浏览型号5M1270ZT64I4N的Datasheet PDF文件第8页浏览型号5M1270ZT64I4N的Datasheet PDF文件第10页浏览型号5M1270ZT64I4N的Datasheet PDF文件第11页浏览型号5M1270ZT64I4N的Datasheet PDF文件第12页浏览型号5M1270ZT64I4N的Datasheet PDF文件第13页  
1. MAX V Device Family Overview  
MV51001-1.2  
The MAX® V family of low cost and low power CPLDs offer more density and I/Os  
per footprint versus other CPLDs. Ranging in density from 40 to 2,210 logic elements  
(LEs) (32 to 1,700 equivalent macrocells) and up to 271 I/Os, MAX V devices provide  
programmable solutions for applications such as I/O expansion, bus and protocol  
bridging, power monitoring and control, FPGA configuration, and analog IC  
interface.  
MAX V devices feature on-chip flash storage, internal oscillator, and memory  
functionality. With up to 50% lower total power versus other CPLDs and requiring as  
few as one power supply, MAX V CPLDs can help you meet your low power design  
requirement.  
This chapter contains the following sections:  
“Feature Summary” on page 1–1  
“Integrated Software Platform” on page 1–3  
“Device Pin-Outs” on page 1–3  
“Ordering Information” on page 1–4  
Feature Summary  
The following list summarizes the MAX V device family features:  
Low-cost, low-power, and non-volatile CPLD architecture  
Instant-on (0.5 ms or less) configuration time  
Standby current as low as 25 µA and fast power-down/reset operation  
Fast propagation delay and clock-to-output times  
Internal oscillator  
Emulated RSDS output support with a data rate of up to 200 Mbps  
Emulated LVDS output support with a data rate of up to 304 Mbps  
Four global clocks with two clocks available per logic array block (LAB)  
User flash memory block up to 8 Kbits for non-volatile storage with up to 1000  
read/write cycles  
Single 1.8-V external supply for device core  
MultiVolt I/O interface supporting 3.3-V, 2.5-V, 1.8-V, 1.5-V, and 1.2-V logic levels  
Bus-friendly architecture including programmable slew rate, drive strength,  
bus-hold, and programmable pull-up resistors  
Schmitt triggers enabling noise tolerant inputs (programmable per pin)  
© 2011 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS and STRATIX are Reg. U.S. Pat. & Tm. Off.  
and/or trademarks of Altera Corporation in the U.S. and other countries. All other trademarks and service marks are the property of their respective holders as described at  
www.altera.com/common/legal.html. Altera warrants performance of its semiconductor products to current specifications in accordance with Altera’s standard warranty, but  
reserves the right to make changes to any products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any  
information, product, or service described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device  
specifications before relying on any published information and before placing orders for products or services.  
MAX V Device Handbook  
May 2011  
Subscribe  
 复制成功!