AV-51002
2017.02.10
2-6
Recommended Transceiver Power Supply Operating Conditions
Symbol
Description
Condition
—
Minimum(114)
Typical
—
Maximum (114)
3.6
Unit
V
VI
DC input voltage
Output voltage
–0.5
0
VO
—
—
VCCIO
85
V
Commercial
Industrial
Standard POR
Fast POR
0
—
°C
°C
—
—
TJ
Operating junction temperature
Power supply ramp time
–40
200 µs
200 µs
—
100
—
100 ms
4 ms
tRAMP
—
Recommended Transceiver Power Supply Operating Conditions
Table 2-6: Recommended Transceiver Power Supply Operating Conditions for Arria V GZ Devices
Symbol
Description
Minimum (118)
Typical
3.0
Maximum(118)
3.15
Unit
2.85
VCCA_GXBL
Transceiver channel PLL power supply (lef side)
V
(119) (120)
,
2.375
2.85
2.5
2.625
3.15
3.0
VCCA_
GXBR
Transceiver channel PLL power supply (right side)
V
(119) (120)
,
2.375
0.82
2.5
2.625
0.88
VCCHIP_L
VCCHSSI_L
VCCHSSI_R
Transceiver hard IP power supply (lef side)
Transceiver PCS power supply (lef side)
Transceiver PCS power supply (right side)
0.85
0.85
0.85
V
V
V
0.82
0.88
0.82
0.88
(114)
(118)
(119)
(120)
e power supply value describes the budget for the DC (static) power supply tolerance and does not include the dynamic tolerance requirements.
Refer to the PDN tool for the additional budget for the dynamic tolerance requirements.
is value describes the budget for the DC (static) power supply tolerance and does not include the dynamic tolerance requirements. Refer to the
PDN tool for the additional budget for the dynamic tolerance requirements.
is supply must be connected to 3.0 V if the CMU PLL, receiver CDR, or both, are configured at a base data rate > 6.5 Gbps. Up to 6.5 Gbps, you can
connect this supply to either 3.0 V or 2.5 V.
When using ATX PLLs, the supply must be 3.0 V.
Arria V GZ Device Datasheet
Send Feedback
Altera Corporation
ALTERA [ ALTERA CORPORATION ]
