AV-51001
2013.05.06
4
Summary of Arria V Features
Feature
Description
FPGA
• 1.6 Gbps LVDS receiver and transmitter
General-purpose
I/Os (GPIOs)
• 800 MHz/1.6 Gbps external memory interface
• On-chip termination (OCT)
• 3.3 V support 1
External Memory Memory interfaces with low latency:
Interface
• Hard memory controller-up to 1.066 Gbps
• Soft memory controller-up to 1.6 Gbps
Low-power
high-speed serial
interface
• 600 Mbps to 12.5 Gbps integrated transceiver speed
• Less than 105 mW per channel at 6 Gbps, less than 165 mW per channel at 10 Gbps,
and less than 170 mW per channel at 12.5 Gbps
• Transmit pre-emphasis and receiver equalization
• Dynamic partial reconfiguration of individual channels
• Physical medium attachment (PMA) with soft PCS that supports 9.8304 Gbps CPRI
(Arria V GT and ST only)
• PMA with hard PCS that supports up to 9.8 Gbps CPRI (Arria V GZ only)
• Hard PCS that supports 10GBASE-R and 10GBASE-KR (Arria V GZ only)
HPS
• Dual-core ARM Cortex-A9 MPCore processor-up to 800 MHz maximum frequency
with support for symmetric and asymmetric multiprocessing
(Arria V SX and ST
devices only)
• Interface peripherals—10/100/1000 Ethernet media access control (EMAC), USB 2.0
On-The-GO (OTG) controller, quad serial peripheral interface (QSPI) flash controller,
NAND flash controller, Secure Digital/MultiMediaCard (SD/MMC) controller, UART,
serial peripheral interface (SPI), I2C interface, and up to 85 HPS GPIO interfaces
• System peripherals—general-purpose timers, watchdog timers, direct memory access
(DMA) controller, FPGA configuration manager, and clock and reset managers
• On-chip RAM and boot ROM
• HPS–FPGA bridges—include the FPGA-to-HPS, HPS-to-FPGA, and lightweight
HPS-to-FPGA bridges that allow the FPGA fabric to issue transactions to slaves in
the HPS, and vice versa
• FPGA-to-HPS SDRAM controller subsystem—provides a configurable interface to
the multiport front end (MPFE) of the HPS SDRAM controller
• ARM CoreSight™ JTAG debug access port, trace port, and on-chip trace storage
Configuration
• Tamper protection-comprehensive design protection to protect your valuable IP
investments
• Enhanced advanced encryption standard (AES) design security features
• CvP
• Partial and dynamic reconfiguration of the FPGA
• Active serial (AS) x1 and x4, passive serial (PS), JTAG, and fast passive parallel (FPP)
x8, x16, and x32 (Arria V GZ) configuration options
• Remote system upgrade
1
Arria V GZ devices support 3.3 V with a 3.0 V VCCIO
.
Arria V Device Overview
Altera Corporation
Feedback
ALTERA [ ALTERA CORPORATION ]
