Pneumatic CrimpingTool
for Original Ferrules
•
•
Operates on 60 - 90 psi air supply
Crimp insulated and uninsulated
ferrules
Trapezoidal crimp geometry
Flexible coil air hose with 1/4"
NPT interchange
Altech's pneumatic crimping tools
speed the crimping process of
insulated or uninsulated ferrules for a
wide range of wire sizes up to 8 AWG.
•
•
Altech pneumatic crimpers are simple
and easy to use. Just install the ferrule
over the end of the stripped wire and
insert it into either the front or side tool
opening. Then touch the actuating lever
or push the foot switch pedal to initiate
the crimp cycle. Once the head closes it
•
•
Metal tool body and base
Hardened steel crimp head
will
automatically
reopen
after
crimping.The resulting crimp features a
compact trapezoidal cross section which
is mechanically very strong and
provides a large surface to insure a
highly efficient electrical contact.
Wire/ Ferrule Size
Tool Wt.
g (lbs.)
Std.
Pack
2
Tool
AWG
mm
Cat. No.
22.014
Hand Held Crimper with Actuating Lever
Crimp Insulated Ferrules
24-14
0.25-2.5
430 (.95)
1
1
1
1
Crimp
ferrules
efficiently
and
economically. A unique dual crimping
head provides convenient front or side
wire entry, allowing crimping from
multiple positions. This features makes
crimping in tight places simple.
and Uninsulated Ferrules
Hand Held Crimper with Actuating Lever
Crimp Insulated Ferrules
12-8
24-14
12-8
4-10
0.25-2.5
4-10
22.015
22.016
22.017
430 (.95)
1000 (2.20)
1000 (2.20)
and Uninsulated Ferrules
Choose either lever actuated, hand held
units or hands-free foot switch operated
table top models, in two basic tool sizes.
Hand held models feature a flexible coil
air-hose with 1/4" NPT interchange
connector for quick hook-up with a
standard push-to-connect coupler.
Table Top Crimper with Foot Switch and Storage Trays
Crimp Insulated Ferrules
and Uninsulated Ferrules
Table Top Crimper with Foot Switch and Storage Trays
Crimp Insulated Ferrules
and Uninsulated Ferrules
The table top units also include
a
Magnetic Mounting Holder
for hand held pneumatic crimpers
22.018
22.019
---
---
1
1
flexible coil air hose to the foot switch
and a 1/4" NPT interchange located on
the foot switch for one hand push-to-
connect supply hook-up. They feature a
sturdy metal base with integral table
clamp and dual storage trays for quick
access to the ferrule supply. The air
release port on the foot switch has been
Counterbalance
for hand held pneumatic crimpers
quieted with
a sintered bronze air
silencer. The foot switch has a metal
frame and a tough fiberglass shroud. Its
spring return pedal provides for short
actuating cycles.
Optional items for the hand held
crimper include a counterbalance for
maximum control and
holder for storage.
a magnetic
20
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com