Crimpers
Crimpit F 4
Crimping tool for ferrules (according to DIN 46228 part 1 and 4) with or without
plastic collars. Only one crimping profile for the entire cross-section range.
Ferrules: 0,5 – 4 mm2 (20 – 12 AWG)
Twin Ferrules: 2 x 0.5 – 2 x 2.5 mm2 (2 x 20 – 2 x 14 AWG)
Cat. No.: Crimpit F 4
Weight 448 g
Crimpit F 6 Auto
Crimping tool for ferrules (according to DIN 46228 part 1 and 4) with and
without plastic collars. Feeding from front.
Ferrules: 0,5 – 6 mm2 (20 – 10 AWG)
Twin Ferrules: 2 x 0.5 – 2 x 2.5 mm2 (2 x 20 – 2 x 14 AWG)
Cat. No.: Crimpit F 6 Auto
Weight 426 g
Crimpit F 6 Gyra
Crimping tool for ferrules (according to DIN 46228 part 1 and 4) with and
without plastic collars. Rotatable crimp die for feeding from the front or the
side.
Ferrules: 0,14 – 6 mm2 (26 – 10 AWG)
Twin Ferrules: 2 x 0.5 – 2 x 4 mm2 (2 x 20 – 2 x 12 AWG)
Cat. No.: Crimpit F 6 Gyra
Weight 428 g
Crimpit F 6 EN
Crimping tool for ferrules (according to DIN 46228 part 1 and 4) with and
without plastic collars. Crimp conforms to EN 60947-1. Five crimping profiles
for the rated conductor cross-sections. Registration in accordance with VG
95211 (Military designation VG 95236 T 14 A 0001).
Ferrules: 0.25 – 6 mm2 (24 – 10 AWG)
Twin Ferrules: 2 x 0.75 – 2 x 4 mm2 (2 x 18 – 2 x 12 AWG)
Cat. No.: Crimpit F 6 EN
Weight 423 g
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
11