欢迎访问ic37.com |
会员登录 免费注册
发布采购

ASM1834ASF 参数 Datasheet PDF下载

ASM1834ASF图片预览
型号: ASM1834ASF
PDF下载: 下载PDF文件 查看货源
内容描述: 双5V和3.3V备用电源监控器,带有手动复位 [Dual 5V and 3.3V uP Power Supply Supervisor with Manual Reset]
分类和应用: 监控
文件页数/大小: 10 页 / 257 K
品牌: ALSC [ ALLIANCE SEMICONDUCTOR CORPORATION ]
 浏览型号ASM1834ASF的Datasheet PDF文件第2页浏览型号ASM1834ASF的Datasheet PDF文件第3页浏览型号ASM1834ASF的Datasheet PDF文件第4页浏览型号ASM1834ASF的Datasheet PDF文件第5页浏览型号ASM1834ASF的Datasheet PDF文件第6页浏览型号ASM1834ASF的Datasheet PDF文件第7页浏览型号ASM1834ASF的Datasheet PDF文件第8页浏览型号ASM1834ASF的Datasheet PDF文件第9页  
April 2005  
ASM1834/A/D  
rev 1.3  
Dual 5V and 3.3V µP Power Supply Supervisor with Manual Reset  
All devices operate over the extended industrial temperature  
range. Devices are available in 8-pin DIP, surface mount 8-pin  
SO and 8-Pin MicroSO packages. Die are also available.  
General Description  
The ASM1834 supervisors simultaneously monitor both 3.3V  
and 5V power sources and generate reset signals when either  
supply is out of tolerance. When an out-of-tolerance condition is  
detected, the output-reset signal of the affected supply  
becomes active and resets the system microprocessor/  
microcontroller. On power-up and after the supply voltage  
returns to an in-tolerance condition, the reset signal remains  
active for approximately 350ms. This allows the power supply  
and system microprocessor to stabilize.  
Key Features  
Monitors 5V and 3.3V supplies simultaneously  
5V and 3.3V power-on reset  
350ms reset time  
Debounced pushbutton reset input  
Push-pull CMOS output  
• ASM1834, ASM1834D  
• Eliminates external pull-up resistors  
• Active LOW (ASM1834), HIGH (ASM1834D)  
Open Drain Output  
Tolerance levels are independently selectable for both supplies.  
Tolerance options are 5% and 10% percent for the 5V supply  
and 10% and 20% percent for the 3.3V supply.  
• ASM1834A  
• Active LOW  
The ASM1834 and ASM1834D have push-pull reset output  
stages. The ASM1834A reset outputs are open drain devices  
that can both be connected to either 5V or 3.3V supply. The  
ASM1834 and ASM1834A have active LOW reset outputs. The  
ASM1834D has active HIGH reset outputs.  
Selectable 5V and 3.3V trip point tolerance  
Internal power drawn from highest input voltage, 5V or  
3.3V  
Precision temperature-compensated voltage reference and  
comparator  
Low cost surface mount SO, compact MicroSO and DIP  
packages.  
All devices can generate reset signals through an internally  
debounced pushbutton reset input that affects both reset  
outputs.  
Wide operating temperature, -40°C to +85°C  
Applications  
Typical Operating Circuit  
Microprocessors  
PDAs, Hand-held PCs  
Embedded Controllers  
Telecommunication Systems  
Power Supplies  
3.3V  
+5V  
5V  
3.3V  
ASM1834  
µP  
Wireless / Cellular Systems  
Networking Hardware  
5V  
3.3V  
IN  
IN  
RESET  
RESET  
PBRST  
GND  
GND  
5VTOL  
3.3VTOL  
Alliance Semiconductor  
2575 Augustine Drive . Santa Clara, CA 95054 . Tel: 408.855.4900 . Fax: 408.855.4999 . www.alsc.com  
Notice: The information in this document is subject to change without notice