Hook-Up Wire
T
he broad range of hook-up
wire from Alpha means you
will find the product exactly
suited to your application—whether
it’s as straightforward as a control
cabinet in a protected environment
or as specialized as a machine
tool on the factory floor, a high-
temperature oven, or off-road
construction equipment.
Our hook-up wire is available in a
variety of insulations to meet your
needs for temperature, ability to
withstand wear and abrasion, elec-
trical performance, or resistance to
oil, solvents, and chemicals.
• Stranded and solid copper
conductors, bare or tinned, with
other platings available for
special application needs
• Broad range of insulations
• Color-coded insulation for easy
circuit identification
• UL, CSA, and Mil-spec
compliance
• Convenient put-ups as short as
100 feet
• Excellent uniformity and
low-fray design for easy handling,
stripping, and termination
Choice of Insulations to Meet Temperature Range and Mechanical and Environmental Requirements
Insulation
PVC
Material
Polyvinyl chloride
Temperature Range
-55°C to +105°C
Features
General-purpose insulation
Good abrasion resistance
Excellent flame resistance
Better abrasion and cut-through resistance than standard PVC
Improved temperature and solder iron resistance over standard PVC
Used in high-density wiring
Excellent recyclability
Excellent abrasion and cut-through resistance
Superior dielectric properties for thinner walls than PVC—allows wires
45% smaller in diameter and 40% light in weight
High temperature
Chemically inert: excellent chemical and solvent resistance
Excellent electrical properties
Higher temperature rating than PVC
High-voltage material
Excellent flexibility
Excellent dielectric strength and resistance to radiation, corona, and ozone
Widely used in wire wrap applications
High-temperature applications
Chemically inert: excellent chemical and solvent resistance
Moisture resistant
Withstands mechanical abuse and repeated flexing
High-temperature applications, such as heat-treating furnaces,
kilns, and food service equipment
Excellent thermal stability
XL-PVC
Cross-linked PVC
-55°C to +105°C
mPPE
Modified polyphenylene ether
-40°C to +105°C
PTFE
XLPE
Silicone
PDVF
ETFE
TGGT
Polytetrafluoroethylene
Cross-linked polyethylene
Silicone
Polyvinylidene fluoride
Ethylene tetrafluoroethylene
Teflon glass glass Teflon
-55°C to +200°C
-55°C to +125°C
-40°C to +150°C
-40°C to +125°C
-70°C to +150°C
+250°C
MG
Mica glass
+450°C
378
Alpha Wire | www.alphawire.com | 1-800-52 ALPHA
Specifications subject to change. For complete specifications and availability, visit www.alphawire.com.
ALPHAWIRE [ Alpha Wire ]
