ASAHI KASEI
[AK4644]
Stereo Line Output
Example:
PLL, Master Mode
Audio I/F Format :MSB justified (ADC & DAC)
Sampling Frequency: 44.1kHz
Digital Volume: −8dB
FS3-0bits
0,000
1,111
LOVL=MINL bits = “0”
(Addr:05H, D5&D2-0)
(1)
(1) Addr:05H, Data:27H
(2) Addr:02H, Data:10H
(3) Addr:09H&0CH, Data:91H
(4) Addr:0AH&0DH, Data:28H
(5) Addr:03H, Data:40H
(6) Addr:00H, Data:6CH
(7) Addr:03H, Data:00H
Playback
(10)
DACL bit
(Addr:02H, D4)
(2)
IVL/R7-0bits
E1H
91H
28H
(Addr:09H&0CH, D7-0)
(3)
(4)
DVL/R7-0bits
18H
(Addr:0AH&0DH, D7-0)
LOPS bit
(Addr:03H, D6)
(5)
(7)
(8)
(11)
PMDAC bit
(Addr:00H, D2)
PMMIN bit
(8) Addr:03H, Data:40H
(9) Addr:00H, Data:40H
(10) Addr:02H, Data:00H
(11) Addr:03H, Data:00H
(Addr:00H, D5)
(6)
(9)
PMLO bit
(Addr:00H, D3)
>300 ms
>300 ms
LOUT pin
ROUT pin
Normal Output
Figure 81. Stereo Lineout Sequence
<Example>
At first, clocks should be supplied according to “Clock Set Up” sequence.
(1) Set up the sampling frequency (FS3-0 bits). When the AK4644 is PLL mode, DAC and Stereo Line-Amp
should be powered-up in consideration of PLL lock time after the sampling frequency is changed.
(2) Set up the path of “DAC Æ Stereo Line Amp”: DACL bit = “0” Æ “1”
(3) Set up the input digital volume (Addr: 09H and 0CH)
When PMADL = PMADR bits = “0”, IVL7-0 and IVR7-0 bits should be set to “91H”(0dB).
(4) Set up the output digital volume (Addr: 0AH and 0DH)
When DVOLC bit is “1” (default), DVL7-0 bits set the volume of both channels. After DAC is powered-up,
the digital volume changes from default value (0dB) to the register setting value by the soft transition.
(5) Enter power-save mode of Stereo Line Amp: LOPS bit = “0” Æ “1”
(6) Power-up DAC, MIN-Amp and Stereo Line-Amp: PMDAC = PMMIN = PMLO bits = “0” → “1”
The DAC enters an initialization cycle that starts when the PMDAC bit is changed from “0” to “1” at PMADL
and PMADR bits are “0”. The initialization cycle time is 1059/fs=24ms@fs=44.1kHz. During the
initialization cycle, the DAC input digital data of both channels are internally forced to a 2's compliment, “0”.
The DAC output reflects the digital input data after the initialization cycle is complete. When PMADL or
PMADR bit is “1”, the DAC does not require an initialization cycle. When ALC bit is “1”, ALC is disable
(ALC gain is set by IVL/R7-0 bits) during an intialization cycle (1059/fs=24ms@fs=44.1kHz). After the
initialization cycle, ALC operation starts from the gain set by IVL/R7-0 bits.
LOUT and ROUT pins rise up to VCOM voltage after PMLO bit is changed to “1”. Rise time is 300ms(max)
at C=1µF and AVDD=3.3V.
(7) Exit power-save mode of Stereo Line-Amp: LOPS bit = “1” Æ “0”
LOPS bit should be set to “0” after LOUT and ROUT pins rise up. Stereo Line-Amp goes to normal operation
by setting LOPS bit to “0”.
(8) Enter power-save mode of Stereo Line-Amp: LOPS bit: “0” Æ “1”
(9) Power-down DAC, MIN-Amp and Stereo Line-Amp: PMDAC = PMMIN = PMLO bits = “1” → “0”
LOUT and ROUT pins fall down to AVSS. Fall time is 300ms(max) at C=1µF and AVDD=3.3V.
(10)Disable the path of “DAC Æ Stereo Line-Amp”: DACL bit = “1” Æ “0”
(11)Exit power-save mode of Stereo Line-Amp: LOPS bit = “1” Æ “0”
LOPS bit should be set to “0” after LOUT and ROUT pins fall down.
MS0477-E-01
2006/10
- 90 -
AKM [ ASAHI KASEI MICROSYSTEMS ]
